Denon AVR-3310CI manual 10

ENGLISH

Getting	Making Detailed Settings (Manual Setup)
	Setting items	Setting contents
Started
	Speaker Configuration	Surround Back : Set the presence, size and number of surround back
	(Continued)	speakers.
		• Large : Use of a large speaker that can adequately playback low
Connections		frequencies.
		• Small : Use of a small speaker that has inadequate playback capacity for
		low frequencies.
		• None : Select when the surround back speakers are not connected.
		• 2spkrs : Use two surround back speakers.
Settings
		• 1spkr : Use only one surround back speaker. When you select this
		setting, connect the surround back speaker to the left (L) channel.
Playback		• When the “Amp Assign” setting (vpage 8) is other than “Normal”,
		you cannot make the “Surround Back” setting.
		• Even when the Surround Back Speaker setting is other than “None”,
Information		sound may not be emitted from the surround back speaker, depending
		on the playback source. In this case, “Surround Parameters” – “Surround
		Back” setting other than “OFF” (vpage 12).
		Front Height : Set the presence and size of the front height speakers.
Unavailable		• Large : Use of a large speaker that can adequately playback low
		frequencies.
		• Small : Use of a small speaker that has inadequate playback capacity for
		low frequencies.
Functions		• None : Select when the front height speakers are not connected.
		When the “Amp Assign” setting (vpage 8) is other than “Front
		Height”, you cannot make the “Front Height” setting.
After		Front Wide : Set the presence and size of the front wide speakers.
		• Large : Use of a large speaker that can adequately playback low
Upgrading		frequencies.
		• None : Select when the front wide speakers are not connected.
		• Small : Use of a small speaker that has inadequate playback capacity for
		low frequencies.
Specifications		When the “Amp Assign” setting (vpage 8) is other than “Front
		Wide”, you cannot make the “Front Wide” setting.

Setting items	Setting contents
Bass Setting	Subwoofer Mode : Select low range signals to be reproduced by
Settings for subwoofer and	subwoofer.
LFE signal range playback.	• LFE : The low range signal of the channel set to “Small” speaker size is
	added to the LFE signal output from the subwoofer.
	• LFE+Main : The low range signal of all channels is added to the LFE
	signal output from the subwoofer.
	• This can be set when “Speaker Configuration” – “Subwoofer” (vpage
	8) is set to “Yes”.
	• Play music or a movie source and select the mode offering the strongest
	bass.
	• Select “LFE+Main” if you want the bass signals to always be produced
	from the subwoofer.
	LPF for LFE : Set LFE signal playback range.
	• 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
Distance	Unit : Set the unit of distance.
Set distance from listening	• Feet
position to speakers.	• Meters
Measure beforehand the	Step : Set the minimum variable width of the distance.
distance from the listening	• 1ft / 0.1ft
position to each speaker.	• 0.1m / 0.01m

Front L / Front R / Center / Subwoofer / Surround L / Surround R /

S. Back Lz / S. Back Rz / Front Height L / Front Height R / Front Wide

L / Front Wide R : Select the speaker.

z: When the “Speaker Configuration” – “Surround Back” setting (vpage 9) is set to “1spkr”, “S. Back” is displayed.

• 0.0ft ~ 60.0ft / 0.00m ~ 18.00m : Set the distance.

• Speakers set to “None” in “Speaker Configuration” (vpage 8) are not displayed.

• The speakers that can be selected differ depending on the “Amp Assign” (vpage 8) and “Speaker Configuration” (vpage 8) settings.

• Default settings :

Front / Center / Subwoofer / Front Height / Front Wide : 12.0 ft (3.60 m)

Surround / Surround Back : 10.0 ft (3.00 m)

• Set the difference in the distance between the speakers to less than 20 feet (6.0 meters).

Default : Reset all distance settings to factory default.

• Yes : Reset to the defaults.

• No : Do not reset to the defaults.

When you select “Default” and press ENTER, the “Default Setting?” prompt is displayed. Select either “Yes” or “No”, and press ENTER.

	Main remote control	:Displaying the menu	:Moves the cursor	:Confirm the setting	:Return to previous menu
	operation buttons	Cancel the menu	(Up/Down/Left/Right)