Denon AVR-3310CI manual 11

Setting items	Setting contents
Channel Level	Test Tone Start : Output test tone.
Set the volume of the test	• Front L / Front Height L / Center / Front Height R / Front R / Front
tone to be the same when it	Wide R / Surround R / S. Back Rz / S. Back Lz / Surround L / Front
is output from each speaker.	Wide L / Subwoofer : Select the speaker.
	z : When the “Speaker Configuration” – “Surround Back” setting
	(vpage 9) is set to “1spkr”, “S. Back” is displayed.
	• –12.0dB~ +12.0dB (0.0dB) : Adjust the volume.
	• Speakers set to “None” in the “Speaker Configuration” (vpage 8)
	settings are not displayed.
	• When o is pressed while the subwoofer volume is set to “–12 dB”, the
	“Subwoofer” setting switches to “OFF”.
	• When a headphones jack is inserted in the PHONES terminal of the AVR-
	3310CI, the “Channel Level” is not displayed.
	• You can also press [CHANNEL LEVEL] to set (vpage 79 of GThe
	original versionH Operating Instructions “Adjust the Volume of the
	Different Speakers“).
	Default : Reset all channel level settings to factory default.
	• Yes : Reset to the defaults.
	• No : Do not reset to the defaults.
Crossover Frequency	40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
Outputs at below set	250Hz : Set the crossover frequency.

frequency, each speaker’s	Advanced : Specify crossover frequency for each speaker.
bass signal output from
	• Front / Center / Surround / Surround Back / Front Height / Front
the subwoofer. Set this
	Wide : Select the speaker.
according to the low
	• 40Hz / 60Hz / 80Hz / 90Hz	/ 100Hz	/ 110Hz / 120Hz /150Hz	/ 200Hz /

frequency reproduction	250Hz : Set the crossover frequency.
capabilities of the speakers
you are using.
	• Can be set when the “Speaker Configuration” – “Subwoofer” (vpage
	8) setting is “Yes”, or when you have a speaker that is set to “Small”.
	• Always set the crossover frequency to “80 Hz”. When using small
	speakers, however, we recommend setting the crossover frequency to
	a higher frequency.
	• For speakers set to “Small”, sound below the crossover frequency is cut
	from the sound output. The cut bass sound is output from the subwoofer
	or front speakers.
	• The speakers that can be set when “Advanced” is selected differ
	according to the “Subwoofer Mode” setting (vpage 9).
	• When “LFE” is selected, speakers set to “Small” at “Speaker
	Configuration” can be set. If the speakers are set to “Large”, “Full
	Band” is displayed and the setting cannot be made.
	• If set to “LFE+Main”, this setting can be made regardless of the
	speaker size.

		ENGLISH
	Making Detailed Settings (Manual Setup)		Getting
Setting items	Setting contents
			Started
Front Speaker Setup	Setting : Choose the method for setting the front speakers.
Set the front speakers to	• Normal : The front speakers are set using the <FRONT SPEAKERS>.
use for every surround	• Custom : The front speakers used for the different playing modes are
mode.	set in advance.		Connections
	2CH DIRECT/STEREO : The front speakers used in the direct, stereo and
	pure direct play modes (2 channel) are set in advance.
	• A : Front speaker A is used.
	• B : Front speaker B is used.
			Settings
	• A+B : Both front speakers A and B are used.
	MULTI CH : The front speakers used in modes other than the direct,
	stereo and pure direct play modes (2 channel) are set in advance.
	• A : Front speaker A is used.		Playback
	• B : Front speaker B is used.
	• A+B : Both front speakers A and B are used.
	NOTE		Information
	• When set to “Custom”, <FRONT SPEAKERS> does not operate.
	• The front speaker setting stored for the “Quick Select” function is given
	priority.
			Upgrading After Functions Unavailable
			Specifications

Main remote control	:Displaying the menu	:Moves the cursor	:Confirm the setting	:Return to previous menu	10
operation buttons	Cancel the menu	(Up/Down/Left/Right)