ENGLISH

Started Getting

Unavailable Functions After Upgrading

When upgrading, the RS-232C connector cannot be used for the DENON RF remote controller.

Settings Connections

Connecting Devices

External Controller

vpage 22 of GThe original versionH Operating Instructions

nRS-232C connector

When you connect an external control device, you can control the AVR-3310CI with the external control device. Perform the operation below beforehand.

q Turn on the AVR-3310CI’s power.

OPTION

Making Detailed Settings (Manual Setup)

Making Other Settings (Option Setup)

vpage 43 of GThe original versionH Operating Instructions

Specifications Upgrading After Functions Unavailable Information Playback

w Turn off the AVR-3310CI’s power from the external controller. e Check that the AVR-3310CI is in the standby mode.

When upgrading, the DENON RF remote controller cannot be connected.

Set as Necessary

Set this to use the RS-232C connector for the DENON RF remote controller.

“232C Port”

When using the AVR-3310CI in combination with the DENON RF remote controller (RC-7000CI, sold separately) or RF remote receiver (RC-7001RCI, sold separately), two-way communication is enabled. The AVR-3310CI’s status information as well as iPod and Internet audio music files can be browsed watching the RF Remote Controller’s display. For details, refer to the operating instructions of the respective devices.

When upgrading, this setting cannot be selected.

Setting items

Setting contents

 

 

232C Port

Serial Control : Set when using an external controller.

Set when using an external

2Way Remote : Set when using a 2-way remote control unit.

controller or two-way remote

When using a DENON two-way remote control (RC-7000CI or RC-

control connected to the RS-

7001RCI, sold separately), set to “2Way Remote”.

232C terminal.

NOTE

 

 

When setting to “2Way Remote”, you can not use the RS-232C connector

 

as an external controller.

 

 

NOTE

On the GUI menu, when setting “232C Port” to “2Way Remote”, you cannot use the RS-232C connector as an external controller.

19