Denon AVR-3310CI Making Detailed Settings, (Manual Setup), Making the Speaker Settings (Speaker Setup), When upgrading, contents of “Speaker Setup” are modified

Making Detailed Settings

(Manual Setup)

For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 26 of GThe original versionH Operating Instructions).

When upgrading, contents of “Speaker Setup” are modified.

For setting “Speaker Setup”, make settings by referring to this manual but not GThe original versionH Operating Instructions.

Making the Speaker Settings (Speaker Setup)

Default settings are underlined.

Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.

Setting items Setting contents

ENGLISH

Setting items	Setting contents	Getting
Speaker Configuration	Front : Set the front speaker size.
Select speaker configuration	• Large : Use of a large speaker that can adequately playback low
		Started
and size (bass reproduction	frequencies.
capability).	• Small : Use of a small speaker that has inadequate playback capacity for
NOTE	low frequencies.	Connections
Select “Large” or “Small”	• When “Subwoofer” is set to “No”, “Front” can automatically set to
not according to the
	“Large”.
physical size of the speaker
	• When “Front” is set to “Small”, “Center”, “Surround”, “Surround
but according to the low
	Back”, “Front Height” and “Front Wide“ can not be set to “Large”.	Settings
frequency reproduction
	Center : Set the presence and size of the center speaker.
capabilities based on the
frequency set at “Crossover	• Large : Use of a large speaker that can adequately playback low
Frequency” (vpage 10).	frequencies.
		Playback
	• Small : Use of a small speaker that has inadequate playback capacity for
	low frequencies.
	• None : Select when a center speaker is not connected.
	“Large” is not displayed when “Front” is set to “Small”.	Information
	Subwoofer : Set the presence of a subwoofer.
	• Yes : Use a subwoofer.
	• No : Select when a subwoofer is not connected.

Amp Assign

Sets the signal output to the speaker connected to the

SURR. BACK/AMP ASSIGN terminals.

Normal : The surround back channel audio signals are output.

ZONE2 : The ZONE2 audio signals are output.

ZONE3 : The ZONE3 audio signals are output.

ZONE2/3-MONO :The ZONE2 / ZONE3 monaural audio signals are output.

Front A Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp playback of the front A speakers.

Front B Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp playback of the front B speakers.

Front Height : The front height channel audio signals are output.

Front Wide : The front wide channel audio signals are output.

Since “Amp Assign” of AVR-3310CI is set to “ZONE2” by default, audio is not output from the surround back speakers. When using the surround back speakers with MAIN ZONE, change the “Amp Assign” setting to “Normal”.

When “Front” is set to “Small”, “Subwoofer” can automatically set	Unavailable
to “Yes”.
Surround : Set the presence and size of the surround speakers.
• Large : Use of a large speaker that can adequately playback low
	Functions
frequencies.
• Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
	After
• None : Select when the surround speakers are not connected.
• When “Surround” is set to “Large”, “Surround Back”, “Front Height”	Upgrading
and “Front Wide“ can be set to “Large”.
• When “Surround” is set to “None”, “Surround Back”, “Front Height”
and “Front Wide” can automatically set to “None”.	Specifications

				See overleaf
					
Main remote control	:Displaying the menu	:Moves the cursor	:Confirm the setting	:Return to previous menu
operation buttons	Cancel the menu	(Up/Down/Left/Right)