Denon AVR-3312 104

nnA-DSX Soundstage

Default settings are underlined.

Adjust Audyssey DSX™ setting and sound stage parameters.

Setting items	Setting details

Audyssey DSX™	ON–Height– : Turn on A-DSX processing for height expansion.
Provides more immersive	ON–Wide– : Turn on A-DSX processing for wide expansion.
surround sound by adding	OFF : Do not set Audyssey DSX™.
the new channels.

	AUDIO/VIDEO ADJUST
Manual EQ	Default settings are underlined.

Use the graphic equalizer to adjust the tone of each speaker.

“Manual EQ” can be set when “MultEQ® XT” setting (vpage 100) is “Manual”.

Setting items	Setting details

Curve Copy	Yes : Copy.
Copy “Audyssey Flat” curve	No : Do not copy.
from MultEQ® XT.

version Basic

Stage Height

Adjust sound stage height when using front height speakers.

–10 – +10 (0)

•“Audyssey DSX™” can be set when you are using front height speakers or front wide speakers.

•“Audyssey DSX™” is only valid when using a center speaker.

•“Audyssey DSX™” is valid when surround mode is STANDARD mode other than PLgz Height.

•“A-DSX Soundstage” cannot be configured if the HD Audio source being played includes Front height and Front wide channels. In this case, the respective channels are played back using the input signals.

•“Curve Copy” is displayed after Audyssey® Auto Setup has been performed.

•When you select “Curve Copy” and press ENTER, the “Set EQ curve to

Audyssey Flat?” prompt is displayed. Select either “Yes” or “No”, and press ENTER.

	Default	Yes : Reset to the defaults.
	The “Manual EQ” settings No : Do not reset to the defaults.
	are returned to the default	When you select “Default” and press ENTER,
	settings.	When you select “Default” and press ENTER,
	settings.	the “Return all settings to the default?”
		the “Return all settings to the default?”

version Advanced

	About Audyssey Dynamic Surround Expansion (A-DSX)
	Audyssey DSX™ is a scalable surround expansion system that adds
	new channels to improve the surround impression. Based on research
	in human hearing Audyssey DSX™ adds a pair of Wide channels in the
	front because that information is critical in the rendering of a realistic
	soundstage.
	Audyssey DSX™ then adds a pair of Height channels above the main
	front channels to reproduce the next most important acoustical and
	perceptual cues related to soundstage depth. In addition to creating
	these new channels, Audyssey DSX™ applies Surround Envelopment
	Processing to enhance the blend between the front and side/back
	surround channels. The result is a much more seamless and enveloping
	home theater experience.

Stage Width	–10 – +10 (0)
Adjust sound stage width
when using front wide
speakers.

	prompt is displayed. Select either “Yes” or
	“No”, and press ENTER.
Adjust Channel	q Select the speaker tone adjustment method.
Correct the tone of each	All : Adjust the tone of all speakers together.
speaker.	L/R : Adjust the tone of left and right speakers together.
	Each : Adjust the tone of each speaker.

wSelect the speaker.

eSelect the adjustment frequency band.

63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz

•Select the speakers you want to adjust when “L/R” or “Each” is selected.

rAdjust the level.

–20.0dB – +6.0dB (0.0dB)

Information

101