Setting items | Setting details |
|
|
HDMI Control | Control : Set the HDMI control function. |
You can link operations with • ON : Use HDMI control function.
devices connected to HDMI • OFF : Do not use HDMI control function. and compatible with HDMI 
Control. | • When a device that is not compatible with the HDMI control function is |
| |
| connected, set “HDMI Control” – “Control” to “OFF”. |
•Please consult the operating instructions for each connected device to check the settings.
•Refer to “HDMI control function” (vpage 70) for more information about the HDMI control function.
NOTE
•When “HDMI Control” – “Control” is set to “ON”, it consumes more standby power. If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet.
•“HDMI Control” does not work when the power to the device is off. Either turn power on or set to standby.
•The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control.
•If the “HDMI Control” – “Control” settings have been changed, always reset the power to connected devices after the change.
Standby Source : Sets the HDMI input source to put into standby when the power is on.
•Last : This item is set at the
•HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 / HDMI6 / HDMI7 : Put the respective input source into standby.
“Standby Source” can be set when “HDMI Control” – “Control” is set to “ON”.
| SYSTEM SETUP |
|
|
Setting items | Setting details |
|
|
HDMI Control | Control Monitor : Set the HDMI MONITOR terminal to output the HDMI |
(Continued) | control signal. |
| • Monitor 1 : Output from the MONITOR 1 terminal. |
| • Monitor 2 : Output from the MONITOR 2 terminal. |
| • “Control Monitor” can be set when “HDMI Control” – “Control” is set |
| to “ON”. |
| • ARC function works only with the terminal selected by “Control |
| Monitor”. |
Power Off Control : Links the power standby of this unit to external devices.
•All : If power to a connected TV is turned off independently of the input source, power to this unit is automatically set to standby.
•Video : If power to a connected TV is turned off when the input source is BD / DVD / TV / SAT/CBL / DVR / GAME1 / GAME2 / V.AUX / DOCK, power to this unit is automatically set to standby.
•OFF : This unit does not link with power to a TV.
“Power Off Control” can be set when “HDMI Control” – “Control” is set to “ON”.
version Basic
version Advanced
Information
BD | 108 |