Setting items | Setting details |
Distance | Unit : Set the unit of distance. |
Set distance from listening | • Meters / Feet |
position to speakers. | Step : Set the minimum variable width of the distance. |
Measure beforehand the | • 0.1m / 0.01m |
distance from the listening | • 1ft / 0.1ft |
position to each speaker. | Default : The “Distance” settings are returned to the default settings. |
| |
| • Yes : Reset to the defaults. |
| • No : Do not reset to the defaults. |
| When you select “Default” and press ENTER, |
| the “Return all settings to the default?” |
| prompt is displayed. Select either “Yes” or |
| “No”, and press ENTER. |
Front L / Front R / Center / Subwoofer / Surround L / Surround R /
Surr.Back Lz / Surr.Back Rz / F.Height L / F.Height R / F.Wide L /
F.Wide R : Select the speaker.
zz When the “Speaker Config.” – “Surr.Back” setting (vpage 105) is set to “1spkr”, “Surr.Back” is displayed.
•0.00m – 18.00m / 0.0ft – 60.0ft : Set the distance.
•The speakers that can be selected differ depending on the “Amp Assign” (vpage 104) and “Speaker Config.” (vpage 104) settings.
•Default settings :
Front L / Front R / Center / Subwoofer / F.Height L / F.Height R / F.Wide L / F.Wide R : 3.60 m (12.0 ft)
Surround L / Surround R / Surr.Back L / Surr.Back R : 3.00 m (10.0 ft)
•Set the difference in the distance between the speakers to less than 6.00 m (20.0 ft).
NOTE
Speakers set to “None” in “Speaker Config.” (vpage 104) are not displayed.
| SYSTEM SETUP |
|
|
Setting items | Setting details |
|
|
Channel Level | Test Tone Start : Output test tone. |
Set the volume of the test | • Front L / F.Height L / Center / F.Height R / Front R / F.Wide R / |
tone to be the same when it | Surround R / Surr.Back Rz / Surr.Back Lz / Surround L / F.Wide L / |
is output from each speaker. | Subwoofer : Select the speaker. |
| zz When the “Speaker Config.” – “Surr.Back” setting (vpage 105) is |
| set to “1spkr”, “Surr.Back” is displayed. |
| • |
| When “Channel Level” is adjusted, the adjusted values are set for all the |
| surround modes. To adjust the channel level separately for the different |
| surround modes, use the operation see page 72. |
| NOTE |
| • Speakers set to “None” in the “Speaker Config.” (vpage 104) |
| settings are not displayed. |
| • When a headphones jack is inserted in the PHONES jack of this unit, the |
| “Channel Level” is not displayed. |
Default : The “Channel Level” settings are returned to the default settings.
•Yes : Reset to the defaults.
•No : Do not reset to the defaults.
When you select “Default” and press ENTER, the “Return all settings to the default?”
prompt is displayed. Select either “Yes” or “No”, and press ENTER.
vSee overleaf
version Basic
version Advanced
Information
BD | 106 |