Connect

•For the method of connecting 7.1-channel system with surround back speakers, see C page 6 “Connecting the speakers”.

•For the method of connecting the TV, see C page 3 “Connect this unit to the television using an HDMI cable (sold separately)”.

7.1-channel (Surround back / Front height / Front wide speaker) connection

The illustration on the right shows a connection example for performing 7.1-channel playback using the surround back, front height or front wide speakers.

If you connect the surround back, front height and front wide speakers before you start playback, the audio is played back by automatically switching the speakers in accordance with the surround mode or input signals.

To perform 7.1-channel playback using the surround back, front height or front wide speakers, set “Amp Assign” to “NORMAL” in steps 3 and 4 for “Set up “Amp Assign”” (vpage 67).

NOTE

•For speaker cable connections, see C page 6 “Connecting the speakers”.

•Connect so that the speaker cable core wires do not protrude from the speaker terminal. The protection circuit may be activated if the core wires touch the rear panel or if the + and – sides touch each other (vpage 143 “Protection

Circuit”).

•Never touch the speaker terminals while the power supply is connected. Doing so could result in electric shock (When the Setup wizard is running, follow the instructions in the Setup wizard screen for making connections.).

•Use speakers with the speaker impedances shown below.

Speaker terminals

Speaker impedance

FRONT

CENTER

SURROUND6 – 16 Ω

SURR. BACK / AMP ASSIGN

F.HEIGHT

F.WIDE

FHL

FL SW

 

FR

FHR

 

 

 

FWL

 

C

 

FWR

 

 

 

 

SL

SR

SBL SBR

Information version Advanced version Basic

61