Denon AVR-488 Connecting Equipment with HDMI connectors, NOTE, Monitor, DVD player, volume down, signals will not be output

Connecting Equipment with HDMI connectors

With HDMI connections, the video and audio signals can be transferred with a single cable.

DVD player			Monitor
		"6%*0
"6%*0		$0"9*"-	)%.*	)%.*
065		065	065	*/

-3

L R

L R

b The AVR-488 is equipped for HDMI version 1.3a. This version is compatible with other versions, allowing connection to all components equipped with an HDMI connector.

b The AVR-488 is compatible with 30- and 36-bit Deep Color.

b The AVR-488 can be connected to a device equipped with an HDMI output connector using an HDMI cable.

b The AVR-488 is compatible with HDMI Ver. 1.3a Deep Color and xvYCC.

ENGLISH

NOTE	Getting
• The audio signal input to the HDMI input connector cannot be played on the AVR-488. Input the audio
signal to the digital audio input connector or analog audio input connector.	Started
• The AVR-488 cannot be controlled from another device via the HDMI cable.
• Video signals are not output if the input video signals do not match the monitor’s resolution. In this case,
switch the DVD player’s resolution to a resolution with which the monitor is compatible.
	Connections
• Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI
connector. Normal playback may not be possible when using a cable other than one on which the HDMI
logo is indicated (a non-HDMI-certified product).
• If the monitor or DVD player does not support Deep Color, deep color signal transfer is not possible.
• If the monitor or DVD player does not support xvYCC, xvYCC signal transfer is not possible.
	Setup
the HDMI connectors, but in order to take full advantage of the AVR-488’s playback sound, turn the TV’s	Playback
• The audio and video signals input to the AVR-488’s HDMI input connector are output unchanged from
the HDMI output connector. Because of this, the sound is output from the monitor connected using
volume down.	Remote
• If the connected monitor or DVD player only has a DVI-D connector, use an HDMI/DVI converter cable.
When using a DVI cable, no audio signals are transmitted.
• Use a Deep Color compatible cable for connection to Deep Color compatible devices.	Control
When connecting with an HDMI/DVI converter cable (adapter)
signals will not be output.	Information
• HDMI video signals are theoretically compatible with the DVI format.
When connecting to a monitor, etc., equipped with a DVI-D connector, connection is possible using an
HDMI/DVI converter cable, but depending on the combination of components in some cases the video
• When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly	Troubleshooting
due to poor connections with the connected cable, etc.

10