Denon AVR-488 Antenna terminals, AM loop antenna assembly, NOTE, lever, lever, Mount, Ground, 75 Ω/ohms, conductor, to a wall, FM antenna, (supplied), 1. Push the

Antenna terminals

An F-type FM antenna cable plug can be connected directly.Direction of broadcasting stationFM antennaAM loop antenna (supplied)75 Ω/ohms Coaxial cableFM indoor antenna(supplied)

	Connection of AM antennas
	1. Push the	2. Insert the	3. Return the
AM outdoor antenna	lever.	conductor.	lever.
	Ground

AM loop antenna assembly
	Connect to the AM
	antenna terminals.	NOTE
		• Do not connect two FM antennas simultaneously.
		• Even if an external AM antenna is used, do not
Remove the vinyl tie and take	Bend in the reverse direction.	disconnect the AM loop antenna.
out the connection line.		• Make sure the AM loop antenna lead terminals do not
		touch metal parts of the panel.

ENGLISH

Troubleshooting Information Control Remote Playback Setup Connections Started Getting

a. With the antenna on top of	b. With the antenna attached
any stable surface.	to a wall.

MountInstallation hole Mount on wall, etc.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

16