Denon AVR-488 fAuto Surround Mode, gRemote ID Setup, 4 AutoSurr. ON, 2.In, .Op, Option, Remote

fAuto Surround Mode

Make setting for memorizing surround mode setting for each input signal type.

[Display]

1.Sp 2.In 3.Op

E

Option Setup

E

4 AutoSurr. ON

[Selectable items]

ON : Memorize settings. Most recently stored surround mode is automatically selected.

OFF : Do not memorize settings. Surround mode does not change according to input signal.

The auto surround mode function lets you store in the memory the surround mode last used for playing the three types of input signals listed below.

qAnalog and PCM 2-channel signals (STEREO)

w 2-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY PLg Cinema)

e Multi-channel signals of Dolby Digital, DTS or other multichannel format (DOLBY/DTS SURROUND)

bDefault settings are indicated in ( ).

gRemote ID Setup

Set remote control ID.

[Display]

	1.Sp		2.In				3		.Op
												E
		Option						Setup
													E
					5	Remote				ID	1
[Selectable items]				1					2	3		4

NOTE

When using the AVR-488 with only the included remote control unit (RC-1079), there is no need to make settings.

When using a separately sold remote control unit (RC-7000CI, etc.), this function can be used. Match the ID setting of the remote control unit and the receiver.

ENGLISH

Troubleshooting Information Control Remote Playback Setup Connections Started Getting

Operations (vpage 19) 24