Denon AVR-787 Press, Press, Press, Press, ¢Adjusting the tone, Setting the tone control, Using the fader function, 3 Press G to select “OFF”, Adjusting the speaker volume

Basic Operation

Setting the tone control

Adjust the bass and treble to suit your tastes.

¢Adjusting the tone

1 Press SURROUND PARAMETER.

2 Press D H to select “TONE DEFEAT”.

In the direct mode, “TONE” cannot be selected.

3 Press G to select “OFF”.4 Press D H to select “Bass” or “Treble”, then press F G to set the level.

Can be adjusted within the range of –10 dB to +10 dB.

5 Press ENTER or SURROUND PARAMETER.

1

2

¢When you do not want to adjust the toneSet “Tone Defeat” to “ON” at step 3 in “Adjusting the tone”.Adjusting the speaker volume

1 Press [CH SELECT].

“S. Back” when surround back speaker set to “1sp”.

2 Press [CH SELECT] to select the speaker.

The settable speaker switches each time this button is pressed.

3 Press [F G] to adjust the volume.

The SW channel level can be turned off by decreasing it one step from –12.0 dB.

OFF ´ –12.0 dB ´ +12.0 dB

32

ENGLISH

Basic Operation

Using the fader function

With this function, the volume of all the front side speakers or all the rear side speakers can be adjusted (attenuated) at once.

1 Press [CH SELECT].

2 Press D H or [CH SELECT] to select “Fader”.

3 Press F to attenuate the volume of all the front side speakers, G to attenuate the volume of all the rear side speakers.

The fader function does not affect the subwoofer.

It is possible to adjust so that the volume of the speaker whose volume is the lowest is –12 dB.

2

3

ENGLISH