Denon AVR-787 1 Press D H to select “Channel Level”, then press ENTER, 5 Press ENTER, 2 Press F G to set, Setting the Channel Level, 4 When “Manual” mode is selected:

Advanced Setup – Part 2

1

2

..... L1

..... L2

..... L3

..... L4

..... L5

..... L6

..... L7

..... L8

•The distance changes in units of 0.5 foot each time the button is pressed. Select the value closest to the measured distance.

•Please note that the difference of distance for every speaker should be 20 ft or less.

Setting the Channel Level

Set the volume of the various speakers so that the sound output from the speakers and the subwoofer seems to have the same volume level.

1 Press D H to select “Channel Level”, then press ENTER.

2 Press F G to set.

Auto:

Adjust the level while listening to the test tones produced automatically from each speaker.

Test tones are automatically emitted from each speaker.

Manual:

Adjust with the speaker from which the test tone is output switched manually.

3 Press D H to select “Test Tone Start”, then press F to select “Yes”.

4 When “Auto” mode is selected: Press F G to adjust the volume.

-1• Test tones are output automatically, in the order shown below.

FL C FR SR

(2 speakers)

SW SL SBLSBR

	(1 speaker)
SB

The volume can be adjusted within the range –12 dB to +12 dB.

4 When “Manual” mode is selected:

Press D H to select the speaker, then press F G to -2adjust the volume.

5 Press ENTER.

56

ENGLISH

Advanced Setup – Part 2

1

2

3

4

-1

•To cancel the setting, press H and select “Level Clear”, then press F and select “Yes”.

•To adjust the channel level separately for the different play modes after setting the channel level, perform the operation on page 32.

ENGLISH