Advanced Operation

Listening to music1 Press [D H] to select the music file, then press [ENTER] or [G].

Press [F] to return to the music menu screen.

2 Press [ENTER] or [G].

• Playback starts.

Pause:

Press [ENTER] during playback.

Press again to resume.

Manual search:

Press and hold in [D H] during playback.

•D: Fast reverse

•H: Fast forward

Track search:

Press [D H] during playback.

•D: Move to beginning of previous track

•H: Move to beginning of next track

Stop:

Press [ENTER] for at least 2 seconds during playback.

Repeat play:

Press [MODE].

The mode switches as follows each time [MODE] is pressed.

•RPT One: Single track repeat

•RPT All: All track repeat

Shuffle play:Press [MEMORY].

The mode switches as follows each time [MEMORY] is pressed.

•SFL Songs: Single track shuffle

•SFL Albums: Album shuffle

The mode switches between the Browse mode and the Remote mode if [MODE] is pressed for at least 2 seconds.

In the Remote mode, only [D H F G] and [ENTER] can be used.

•When STATUS is pressed during playback, the front panel display switches between the title name, artist name and album name.

•Depending on the iPod’s software version, it may not be possible to operate the iPod from the AVR-787. Use the latest version of the software. Information on the latest version of the software can be obtained on the Apple Computer website.

•If you do not want the on screen display to be displayed while playing the iPod, set “Function/Mode Status” at “Setting the On

Screen Display” to “OFF” ( page 52).

•With the AVR-787 it is possible to display folder names and file names on the screen like titles. The AVR-787 can display up to 64 characters, consisting of numbers, capital letters and small letters. A “?” mark is displayed in place of non-compatible characters.

Viewing still pictures and videos(only for iPods equipped with the slideshow / video function)

Use this procedure to view photo and video data stored on the iPod on a monitor.

1 Press [MODE] for at least 2 seconds to switch from the Browse mode to the Remote mode.

• “Remote iPod” is displayed on the AVR-787’s display.

2 Watching the iPod’s screen, press [D H] to select “Photos” or “Video”, then press [ENTER] or [G].

•The iPod’s photo and video data are displayed on the monitor.

•To output photo or video data recorded on the iPod to the monitor, the iPod’s “TV Out” setting (under “Video Settings”) must be set to “ON”.

For details, refer to the iPod’s operating instructions.

38

ENGLISH

Advanced Operation

Disconnecting the iPodPress <ON/STANDBY> or [OFF] and set the AVR-787’s power to the standby mode.

The iPod can be disconnected after switching to a function other than the one to which the iPod input is assigned.

ENGLISH