ENGLISH

Basic Operation

<POWER> CHANNEL
<FUNCTION>BAND

 

TUNING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<ON/STANDBY> SHIFT <PRESET •>SHIFT CHANNEL [FM/AM]
Listening to the radio

Check that the remote control unit is set to “AUDIO”.

Auto preset memory

This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the preset memory.

1 Switch off the unit using <POWER>.

2 Hold <PRESET •> and press <POWER>.

• The unit automatically begins searching for FM broadcast stations.

When the first FM broadcast station is found, that station is stored in the preset memory at channel A1.

Subsequent stations are automatically stored in order at preset channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to F8 and G1 to G8 for a maximum of 56 stations.

Channel A1 is tuned in after the auto preset memory operation is completed.

Basic Operation

Auto tuning1 Use <FUNCTION> to select “TUNER” or press [TUNER].2 Press BAND to select “AM”, “FM” or “XM”.

When listening to the XM Satellite Radio ( page 34, 35).

3 Press [MODE] to set the auto tuning mode.

• The “AUTO” indicator lights.

4 Press TUNING.

• Automatic searching begins.

• If tuning does not stop at the desired station, use to the “Manual tuning” operation.

• “AM” or “FM” can be selected directly by pressing [FM/AM].

[ON SCREEN]

[TUNER]

TUNING

[MODE]

BAND [MEMORY]

About the button names in this explanation

<> : Buttons on the main unit

[

] : Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

•If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it using the manual “Preset memory” operation.

•To interrupt this function, press <ON/STANDBY>.

Manual tuning

1 Use <FUNCTION> to select “TUNER” or press [TUNER].

2 Press BAND to select “AM”, “FM” or “XM”.

When listening to the XM Satellite Radio ( page 34, 35).

3 Press [MODE] to set the manual tuning mode.

Check that the display’s “AUTO” indicator turns off.

4 Press TUNING.

The frequency changes continuously when the button is held in.

•When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.

•“AM” or “FM” can be selected directly by pressing [FM/AM].

33

ENGLISH