Advanced Setup – Part 1

Setting the Setup Lock

This sets whether or not to lock the system setup settings so that they cannot be changed.

1 Press D H to select “Setup Lock”, then press ENTER.2 Press F to select “ON”, then press ENTER.

1

2

 

ENGLISH

Advanced Setup – Part 2

 

 

Speaker Setup

F G, ENTER

• If the “Auto Setup” procedure has already been performed, there is

 

no need to make this setting.

 

• Perform this setting if you wish to make the settings for your

 

speaker systems manually.

 

Setting the Speaker Configuration

 

Automatically set the output component and properties for the

 

various channels according to the combination of speakers to be

D H

actually used for surround playback.

•When the setup lock function is activated, the settings listed below cannot be changed, and “SETUP LOCKED” is displayed when related buttons are operated.

•System setup settings

•Surround parameter settings

•Tone control settings

•Channel level settings (including test tones)

•To unlock, press SYSTEM SETUP again and display the “Setup Lock” screen, then select “OFF” and press ENTER.

ENTER

D H F G

ENTER

D H F G

[TEST TONE]

About the button names in this explanation

<> : Buttons on the main unit

[

] : Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

1 Press D H to select “Speaker Setup”, then press

ENTER.

2 Press D H to select “Speaker Config.”, then press

ENTER.

3 Press D H to select the speaker, then press F G to set.Large:

Select this when using large speakers with ample low frequency reproduction capabilities.

Small:

Select this when using small speakers without ample low frequency reproduction capabilities.

None:

Select this when no speaker is connected.

Yes / No:

Select “Yes” when a subwoofer is connected, “No” when no subwoofer is connected.

2sp / 1sp:

Select the number of surround back speakers.

54

ENGLISH