Denon AVR-2801, AVR-981 7SETTING UP THE SYSTEM

ENGLISH

7SETTING UP THE SYSTEM

•Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 11), make the various settings described below on the monitor screen using the AVR-2801/981’s on-screen display function.

These settings are required to set up the listening room’s AV system centered around the AVR-2801/981.

•Use the following buttons to set up the system:

SYSTEM SETUP button

Press this to display the system setup menu.

AUDIO		DECK	CDR/MD
		CD	MUTING
AVR/AVC	VIDEO	DVD	TV
		VDP	VCR
		SYSTEM	SURROUND
TUNING		SETUP	PARAMETER
BAND		TITLE	MENU/GUIDE
			CH SELECT
MODE			ENTER
			SELECT
MEMORY		STATUS	ON SCREEN
		DISPLAY	RETURN
USE/LEARN	T.TONE		DVD
			SET UP

SURROUND PARAMETER button

Press this to display the surround parameter menu.

ENTER button

Press this to switch the display on the screen.

Also use this button to complete the setting on the screen.

CURSOR buttons

and : Use these to move the cursors (0and 1) to the left and right on the screen.

and : Use these to move the cursors (¥and ») up and down on the screen.

• System setup items and default values (set upon shipment from the factory)

System setup

Default settings

Speaker

Input the combination of speakers in your system

and their

Front Sp.

Center Sp.

Surround Sp.

Subwoofer

corresponding sizes (SMALL for regular speakers, LARGE for full-size,

q

Configuration

full-range) to automatically set the composition of the signals output

Large

Small

Small

Yes

from the speakers and the frequency response.

Subwoofer mode

This selects the subwoofer speaker for playing deep bass signals.

LFE

w

Delay Time

This parameter is for optimizing the timing with which the audio

Front & Subwoofer

Center

Surround L & R

—

signals are produced from the speakers and subwoofer according to

the listening position.

3.6 m (12 ft)

3.6 m (12 ft)

3.0 m (10 ft)

—

e

Channel

This adjusts the volume of the signals output from the speakers and

Front L

Front R

Subwoofer

Center

Surround L

Surround R

—

—

subwoofer for the different channels in order to obtain

optimum

Level

effects.

0 dB

0 dB

0 dB

0 dB

0 dB

0 dB

—

—

Input

CD

DVD

VDP

TV/DBS

VCR-1

VCR-2/

—

—

Digital In

This assigns the digital input jacks for the different input

source

V. AUX

r

Adjutment

sources.

Digital

COAXIAL

OPTICAL 1

OPTICAL 2

OPTICAL 3

OFF

OFF

—

—

Inputs

t

On Screen

This sets whether or not to display the on-screen display that appears

On Screen Display = ON

on the monitor screen when the controls on the remote control unit or

Display

main unit are operated (from MONITOR outputs only).

A1 ~ A8

87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz

B1 ~ B8

520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz

y

Auto Tuner

FM stations are received automatically and stored in the memory.

C1 ~ C8

90.1 MHz

Presets

D1 ~ D8

90.1 MHz

E1 ~ E8

90.1 MHz

NOTES:

• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the AVR-2801/981’s S-Video and video monitor output jacks and signals are input to the AVR-2801/981 from a video source (VDP, etc.) connected to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 22.)

• The AVR-2801/981’s on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with small screens or low resolutions.

• The setup menu is not displayed when “HEADPHONE ONLY” is selected.

14