ENGLISH

[2] Listening over headphones

 

 

 

 

 

 

1

Connect the headphones to the

PHONES

NOTE:

 

PHONES jack of the front panel.

To prevent hearing loss, do not raise the volume level excessively

 

 

when using headphones.

1

2

Press the SPEAKER A or B to turn the

 

 

 

 

speaker off.

 

 

• The output to the speaker and pre-out

 

 

jacks is turned off and no sound is

 

 

produced from the speakers.

(Main unit)

[3] Turning the sound off temporarily (muting)

1

Use this to turn off the audio output

MUTING

 

 

temporarily.

 

 

 

Press the MUTING button.

 

*Cancelling MUTING mode. Press the MUTING button again.

(Remote control unit)

[4] Combining the currently playing sound with the desired image

1

Simulcast playback

VIDEO SELECT

Use this switch to monitor a video

 

source other than the audio source. Press the VIDEO SELECT button repeatedly until the desired source

 

DOLBY / DTS

 

 

 

SPEAKER

SURROUND

DIRECT

 

 

DSP SIMULATION

5CH STEREO

STEREO

 

 

 

 

 

MASTER VOL.

 

INPUT MODE

ANALOG

EXT.IN

 

 

AUDIO

DECK

CDR/MD

 

1

CD

 

MUTING

AVR/AVC

VIDEO DVD

TV

 

VDP VCR

appears on the display.

* Cancelling simulcast playback.

(Main unit)

•Select “SOURCE” using the video select button.

•Switch the program source to the component connected to the video input.

[5] Checking the currently playing program source, etc.

1

On screen display

 

 

• Each time an operation is performed,

 

a description of that operation

 

appears on the display connected to

 

the unit’s VIDEO MONITOR OUT

 

jack. Also, the unit’s operating status

 

can be checked during playback by

 

pressing the remote control unit’s ON

 

SCREEN button.

 

Such information as the position of

 

the input selector and the surround

 

parameter settings is output in

 

sequence.

ON SCREEN

RETURN

(Remote control unit)

 

SYSTEM

SURROUND

 

TUNING

SETUP

PARAMETER

 

BAND

TITLE

MENU/GUIDE

 

 

 

 

 

 

CH SELECT

 

MODE

 

ENTER

 

 

 

SELECT

1

MEMORY

STATUS

ON SCREEN

 

DISPLAY

RETURN

USE/LEARN T.TONE

 

DVD

1

 

 

SET UP

Using the dimmer function

• Use this to change the brightness of the display.

DIMMER

Front panel display

• Descriptions of the unit’s

STATUS

STATUS

 

operations are also displayed

 

DISPLAY

on the front panel display. In

 

 

 

addition, the display can be

 

 

switched to check the unit’s

(Main unit)

(Remote control unit)

operating

status

while

 

 

playing a source by pressing

the STATUS button.

The display brightness changes in four steps

(bright, medium, dim and off) by pressing the

remote control unit’s DIMMER button repeatedly.

*The brightness changes in 3 steps each time the button is pressed, and finally the display turns off.

(Main unit)

34