Denon DBP-1610 AVCHD, CD MP3 WMA JPEG, MP3, WMA, WMA, MP3, WMA, BD-V, BD-V, BD-V, BD-V, DVD-V, DVD-V, DVD-V, DivX®, DVD-VR, A-BRepeat, Repeat Playback, Program Playback

ENGLISH

Playback

Introduction	Repeat Playback
	Available repeat function may vary depending on the discs.
	1) During playback, press [REPEAT] repeatedly until desired
	repeat mode appears on the screen.
	The following repeat modes are available.
	Repeat mode	Available media
	Chapter repeat
Connections		BD-V	DVD-V	DVD-VR
	The current chapter will be
	played back repeatedly.	AVCHD
	Title repeat
		BD-V	DVD-V	DVD-VR
	The current title will be
	played back repeatedly.	AVCHD
	Track repeat
		CD	DivX®	MP3
Playback	The current track or file will
	The current folder will be	WMA	JPEG
	be played back repeatedly.
	Group repeat	DivX®	MP3	WMA
	played back repeatedly.	JPEG
	All repeat
Function		DVD-VR	CD	DivX®
	All titles, tracks or files in
	the media will be played	MP3	WMA	JPEG
Setup	back repeatedly.
	A-B Repeat

		BD-V		DVD-V	DVD-VR	CD	AVCHD	DivX®
		Desired section can be played back repeatedly.
	1)		Press [A-B REPEAT] at the desired starting point A.
Others	2)		Press [A-B REPEAT] at the desired ending point B.
			• The repeat sequence begins.
	3)		Press [A-B REPEAT] to exit the sequence.

Note

•The chapter/title/track/group repeat setting will be cleared when moving to other chapter, title, track/file or folder.

•Repeat playback does not function during A-B repeat playback.

•Repeat chapter/title is not available with some scenes.

•A-B Repeat can only be set within the current title or current track/file.

•A-B Repeat is not available with some scenes.

•To cancel the A point which was set, press [CLEAR].

•A-B Repeat playback does not function during chapter, title, track, group or all repeat playback.

•For some DivX® files, A-B Repeat playback may not function.

Program Playback

CD MP3 WMA JPEG

You can program the disc to play back in your desired order.

1)In stop mode, press [MODE].

• The program screen will appear.

2)Use [U/ V] to select a track/file, then press [ENTER].

- / 7

Program

MP3

MP3_1

MP3_2

MP3_3

MP3_4

MP3_5

MP3_6

MP3_7

1/ 2 1/ 1

Page Down

<Example : MP3>

•For MP3, Windows Media™ Audio, and JPEG, use [U/ V] to

select a folder, then press [ENTER] first, and then use [U/ V] to select a track/file, then press [ENTER].

•Press [CLEAR] to erase the last track/file of the program.

•Select “All Clear” at the bottom of the list to erase all the tracks/files in the program.

•The programmed track/file is displayed in the right hand screen.

•If the entire program cannot be displayed on the screen, “L” or “K” appears.

•Use [Y/ Z] to go back forward between the hierarchy of folders.

•If eight or more tracks/files were set in a program, use [BLU]/ [YEL] to see all the tracks/files.

19

Playback

3)Press B to start program playback.

• Program playback will start.

Note

•During the program playback, press C once to set the resume point, and then press B to resume the program playback from where C was pressed (audio CD) or from beginning of the file where C was pressed (MP3, Windows Media™ Audio, or JPEG).

•During the program playback, press C twice to display the program screen. To go back to the normal program playback, press [RETURN] to exit from the program screen, then press B.

•Your program is still stored until either the disc tray is open or power is turned to the standby mode.

•Up to 99 tracks/files can be entered.

•To repeat the current track/file in the program, press

[REPEAT] repeatedly until “ Track” appears during play back. To repeat the entire program press [REPEAT]

repeatedly until “ All” appears during playback.

•Even if an inserted disc contains mixed MP3 and Windows Media™ Audio files, program function allows 99 files in combination of MP3 and Windows Media™ Audio files.

•The total number of selected tracks for the program playback will be displayed in the front panel display.

•Playback from a desired track/ file and random playback are not available during program playback.

PIP (Picture in Picture) (BONUSVIEW) Setting

BD-V

Some BD-Video have the PIP (picture-in-picture) function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [MODE] repeatedly whenever the scene contains the secondary video.

primary video

secondary video

ENGLISH