Function Setup

To make the most of its feature, set up your speakers appropriately by referring to the table below. Speaker setting options are available in SETUP AQuick AHDMI Audio Out AHDMI Multi(LPCM) or SETUP ACustom AAudio AHDMI Audio Out AHDMI Multi(LPCM)

How to navigate through the “HDMI Multi(LPCM)” setting

1)Use [U / V] to select the menu item.

2)Use [U / V] to select setting items.

Use [RETURN] to go back to the previous screen.

3)Use [Y / Z] to select desired options.(Except for “Test Tone” and “Default”.)

For “Test Tone”:

Use [Y/ Z] to select “Manual” or “Auto”, then press [ENTER].

The test tone will be output. If you select “Manual”, use [U/ V] to select desired speaker, then use [Y/ Z] to adjust the volume. If you select “Auto”, use [Y/ Z] to adjust the volume of the speaker that output the test tone.

If you want to stop the test tone, press [RETURN].

For “Default”:

Press [ENTER] to reset the “Speaker Configuration”, “Channel Level” or “Delay Time” setting to the default.

4)Press [SETUP] to exit.

Menu

Setting items

Options

Descriptions

Speaker Configuration

Front

Large*

Large:

Select the desired

 

 

For the large speakers

 

Small

speaker to set. Then

 

with strong low frequency

 

 

change the setting

 

 

reproduction capabilities.

Center

Large*

appropriately by

Small:

 

 

referring to the

 

Small

For the small speakers

descriptions.

 

 

which do not provide

Subwoofer

On*

 

strong bass sound.

 

 

 

 

Surround

Large*

You cannot change the

 

 

 

setting of “Subwoofer”.

 

 

Small

 

 

If connected device is not

 

 

 

compatible with

 

Surround Back

Large*

 

subwoofer, “Subwoofer”

 

 

 

 

 

Small

will be displayed in gray.

 

 

 

 

 

Default

 

Select “Default”, then

 

 

 

press [ENTER] to reset the

 

 

 

“Speaker Configuration”

 

 

 

setting to the default.

ENGLISH

 

 

 

 

 

Function Setup

 

• For “Speaker Configuration” setting, the settings of each speaker size may be adjusted

 

 

automatically corresponding to each setting. (e.g. If “Front” is set to “Small”, you cannot set

Introduction

“Center”, “Surround” and “Surround Back” to “Large”.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu

Setting items

Options

Descriptions

 

 

 

Channel Level

Test Tone:

 

Off*

Select “Off” to deactivate

 

 

 

Tests or sets the

“Test Tone” is the test

 

 

the “Test Tone” feature.

 

 

 

volume for each

tone which can be

 

 

Select “Manual”, then

 

 

 

speaker.

output from the

 

 

press [ENTER] to manually

 

 

 

 

Manual

 

 

 

 

speakers so that you

 

set the volume for the

 

Connections

 

 

 

 

 

 

 

can adjust the volume

 

 

desired speaker.

 

 

 

for each speaker.

 

 

Select “Auto”,then press

 

 

 

 

Auto

 

 

 

 

 

 

[ENTER] to automatically

 

 

 

 

 

 

 

 

 

 

 

 

 

 

output the test tone from

 

 

 

 

 

 

 

each speaker.

 

 

 

 

Front Lch

 

0 dB to -12 dB

If you have selected

 

 

 

 

 

 

(0 dB*)

“Manual” in “Test Tone”,

 

 

 

 

 

 

 

select the desired speaker

 

 

 

 

Center

 

0 dB to -12 dB

 

 

 

 

 

to set and adjust the

 

 

 

 

 

 

(0 dB*)

 

Playback

 

 

 

 

 

volume for the selected

 

 

 

Front Rch

 

0 dB to -12 dB

 

 

 

 

 

speaker.

 

 

 

 

 

 

(0 dB*)

 

 

 

 

 

 

If you have selected

 

 

 

 

 

 

 

 

 

 

 

Surround Rch

 

0 dB to -12 dB

 

 

 

 

 

“Auto” in “Test Tone”, test

 

 

 

 

 

 

(0 dB*)

tone will be output

 

 

 

 

Surround Back Rch

 

0 dB to -12 dB

automatically in order.

 

 

 

 

 

 

(0 dB*)

Adjust the volume of the

 

 

 

 

 

 

Function

 

 

 

 

 

speaker that output the

 

 

 

Surround Back Lch

 

0 dB to -12 dB

 

 

 

 

 

test tone.

 

 

 

 

 

 

(0 dB*)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Surround Lch

 

0 dB to -12 dB

 

 

 

 

 

 

 

(0 dB*)

 

 

Setup

 

 

 

 

 

 

 

 

 

Subwoofer

 

0 dB to -12 dB

 

 

 

 

 

 

 

 

 

 

 

 

(0 dB*)

 

 

 

 

 

 

 

 

 

 

 

 

 

Default

 

Select “Default”, then

 

 

 

 

 

 

 

 

 

 

 

press [ENTER] to reset the

 

 

 

 

 

 

 

“Channel Level” setting to

 

 

 

 

 

 

 

the default.

 

Others

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remote control operation

: Displaying the menu

: Move the cursor

: Confirm the setting

: Return to previous menu

buttons

Cancel the menu

(Up/Down/Left/Right)

 

 

34