Function Setup

Setting items

Options

Wall Paper

Picture*

Sets the picture to be displayed on

 

Blue

the screen for stop mode or audio

 

Black

playback mode.

Gray

 

•Settings with (*) are the default.

•Quick menu consists of the setting menus frequently used, and they are accompanied with mark.

•For “HDMI RGB Setting”, select “Enhanced” if the black-white contrast is not clear. The setting is effective only for HDMI RGB output.

•Even if “HDMI Video Resolution” is set to “1080p24”, for the BD that is not recorded by 1080p24 frame or for DVD, a video resolution supported by the disc and the display device will be output instead of 1080p24 frame.

•An individual picture on the screen is called as “Frame” , which consists of two separate images called as “Field”. Some pictures may be blurred at the auto setting in “Still Mode” due to their data characteristics.

•If the picture is not output properly to the display device because of the “HDMI Video Resolution” or “Component Output” setting, press and hold B on the front panel for more than 5 seconds. Both settings will be reset to the default automatically.

•If “Component Output” is set to “480i”/“480p”, “4:3 Squeeze Auto” and “4:3 Squeeze On” in “TV Aspect” are not available.

•If HDMI is connected, for video resolution for the component output, you can only select video resolution that currently output from HDMI OUT or 480i.

•If the video resolution for the component output and HDMI video resolution does not match, the video resolution for the component output will be switched to current HDMI output resolution. COMPONENT VIDEO OUT jacks may not output any signals depend on the disc material.

•If you play back copy-protected DVD-Video, 480p signal will be output from the COMPONENT VIDEO OUT jacks, when “Component Output” is set to “720p” or “1080i”.

•The setting items which are not available with current situation of this unit will be displayed in gray and you cannot select the items.

•Even if “HDMI Select” is set to “YCbCr”, if the display device does not support YCbCr, RGB will be output.

•If “HDMI Video Resolution” is set to “Source Direct”, “1080p” or “1080p24”, you cannot set “Component Output”.

Function Setup

 Audio

Audio

 

BD Audio Mode

Mix Audio Output

HDMI Audio Out

HDMI Multi(Normal)

Down Sampling

Off

DRC

Auto

• For how to select the setting items and options, refer to “Custom” on page 29.

Setting items

Options

BD Audio Mode

Mix Audio Output*:

For BD, select whether to output

Output the secondary and interactive audio with

primary audio if it is available.

the secondary and interactive

 

audio with primary audio if it is

 

available or only the primary

HD Audio Output:

audio. Refer to “Setting the BD

Output only the primary audio. Set this mode in order to

Audio Mode” on page 24.

output Dolby Digital, Dolby Digital Plus, Dolby TrueHD,

 

DTS or DTS-HDsound of BD through HDMI connection.

 

 

HDMI Audio Out

HDMI Multi(Normal)*:

Sets the audio format for the audio

The multi-channel audio signals are output from the

HDMI OUT with a bitstream or PCM.

output from the HDMI OUT.

 

 

 

 

HDMI Multi(LPCM):

 

The multi-channel audio signals are output from the

 

HDMI OUT with a PCM.

 

• Refer to pages 33-35for speaker setting options.

 

 

 

HDMI 2ch:

 

The audio signals are output from the HDMI OUT with a

 

downmixed to 2ch PCM.

 

 

 

Audio Mute:

 

Mutes the HDMI audio signal, and set the signal format

 

of the DIGITAL OUT.

 

• Refer to the “Digital Out Setting” on page 33 for setting

 

options.

•The default setting of the “BD Audio Mode” is “Mix Audio Output”. If you want to output only the high quality primary audio, set “BD Audio Mode” to “HD Audio Output”.

Remote control operation

: Displaying the menu

: Move the cursor

: Confirm the setting

: Return to previous menu

buttons

Cancel the menu

(Up/Down/Left/Right)

 

 

32