Introduction |
|
|
| No |
|
|
|
| |
|
|
|
| IP Address Setting |
|
| |||
|
|
|
| Is Setting OK? |
|
|
|
| |
|
|
|
| IP Address |
| ∗∗∗ | . ∗∗∗ . ∗∗∗ . ∗∗∗ |
| |
|
|
|
| Subnet Mask |
| ∗∗∗ | . ∗∗∗ . ∗∗∗ . ∗∗∗ |
| |
|
|
|
| Default Gateway |
| ∗∗∗ | . ∗∗∗ . ∗∗∗ . ∗∗∗ |
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
| Yes |
|
|
|
| |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
Connections |
| Use [U/ V] to select “Yes”, then press [ENTER] to complete the setting. | |||||||
5) | Press [SETUP] to exit. | ||||||||
| |||||||||
| DNS Setting |
|
| ||||||
| 1) | Follow steps 1) to 2) in “IP Address Setting” on page 38. | |||||||
| 2) | ||||||||
| 3) | Press [ENTER] repeatedly to select the desired setting. | |||||||
|
| “Auto(DHCP)” : If your router has DHCP server function select “Auto(DHCP)”. | |||||||
|
| : If your router does not have DHCP server function, select “Manual”. | |||||||
If you select “Manual”, follow the following instruction to set the DNS.
| ||||
| • DNS setting screen will appear. Enter primary DNS and secondary DNS with [U/ V/ Y/ Z] | |||
|
| and [the Number buttons]. | ||
|
|
|
| |
|
| DNS Setting |
| |
Function |
| then press ‘ENTER’. |
| |
|
| |||
|
| Primary DNS |
| |
|
| ∗∗∗ . ∗∗∗ . ∗∗∗ . ∗∗∗ |
| |
|
| Secondary DNS |
| |
|
| ∗∗∗ . ∗∗∗ . ∗∗∗ . ∗∗∗ |
| |
|
|
| ||
• Enter the numbers instructed by your Internet provider. | ||||
| ||||
| • If the number is unknown, check the number of other devices (e.g. PC connected via LAN | |||
|
| cable) and assign the same number. | ||
| ||||
After you enter all correctly, press [ENTER].
• Confirmation message will appear.
DNS Setting | |
|
Is Setting OK? |
|
|
|
|
Primary DNS | ∗∗∗ | . ∗∗∗ | . ∗∗∗ | . ∗∗∗ |
Secondary DNS | ∗∗∗ | . ∗∗∗ | . ∗∗∗ | . ∗∗∗ |
|
|
|
|
|
No |
|
|
|
|
Yes |
|
|
|
|
Proxy Setting
1)Follow steps 1) to 2) in “IP Address Setting” on page 38.
2)Use [U/ V] to select “Proxy Setting”.
3)Press [ENTER] repeatedly to select the desired setting.
•For default settings, select “Do Not Use”.
•Please use this setting when instructed by your Internet service provider.
If you select “Use”, follow the following instruction to set the proxy address and proxy port.
Proxy Address
Use [U/ V] to select “Proxy Address”, then press [ENTER]. Enter proxy address.
• The keyboard screen will appear.
Proxy Address
∗∗∗∗∗∗∗∗∗∗∗∗_
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
a | b | c | d | e | f | g | h | i | j |
k | l | m | n | o | p | q | r | s | t |
u | v | w | x | y | z | . | - | _ | OK |
Clear |
|
| All Clear |
| a/A/@ |
| OK | ||
[U/ V/ Y/ Z] : Move the highlight.
[the Number buttons] : Enter number.
[ENTER] : Enter the highlighted number/word.
[RED] : Clear the entered number or word.
[GRN] : Clear all the entered numbers or words.
[BLU] : Switch between abc ? ABC ? @!?
[YEL] : Set the entered number or word.
After you enter all correctly, press [YEL].
• Confirmation message will appear.
Proxy Address
Is Setting OK?
************
No
Yes
Use [U/ V] to select “Yes”, then press [ENTER] to complete the setting and go back to the proxy setting screen.