Denon DN-C630 user service Basic Operation, English, 6-2 4,5-2 1Before Starting Playback

ENGLISH

4 BASIC OPERATION

				6-1	3		5-1
POWER		COMPACT DISC PLAYER DN-C630
					TIME
				OPEN / CLOSE
					PLAY				0%
				TRACK	MODE	END MON	INDEX REPEAT	A-B	PITCH
PHONES	LEVEL	STOP	CUE	PLAY / PAUSE
						SEARCH		PROG. IN
	MIN MAX
				PRESET

6-2 4,5-2 7

(1)Before Starting Playback

1Load a disc.

Make the presettings according to the usage purpose. (See page 20.)

NOTE: Step 1 and 2 can be performed in the opposite order.

Select the play finish mode. (Preset Function)

Finish Stop	The stop mode (the servo functions
	turn off) is set when playback
	finishes.
Finish Next	The standby mode is set at the
	beginning of the next track when
2	playback is finished.
	* After the final track is played, the
	standby mode is set at the
	beginning of the first track.
Finish Recue	When playback is finished, the
	standby mode is set at the position at
	which playback was started.

To standby at the point where the sound begins. (Preset Function)

Set the “CueDet.” Level.

When a track is selected, the position at which the sound begins is found when a track is cued and the standby mode is set at that point.

Select the play mode.

Press the PLAY MODE button.

3	Single track
	play mode

Lit

Continuous play mode

Lit

Select the track to be played.

Turn the select knob (8– 9).

4 Flashing during search Lit when standby

The selected track is cued and the standby mode is set.

To select an index number.

Press the INDEX button.

INDEX

The index number appear when the index select mode is set.

5-1

NOTE: The track select mode is set when the button is off.

There is no need to select an index number when you want to play the track from the beginning.

Turn the select knob (8– 9).

Index number	Index number
Flashing during search	Lit when standby

5-2

The selected index number is cued and the standby mode is set.

If a non-existent index number is selected,

“No 02.Index” appears and the index number flashes.

To check the play start position.

Press the PLAY/PAUSE button.

LitOff

PLAY / PAUSE PLAY / PAUSE CUE

6-1

Monitor the playback signals to check the play start position.

Press the CUE button.

FlashingLit

CUE CUE CUE

6-2

The pickup returns to the play start position and the standby mode is set. (Back Cue)

To check the play end position.

Press the END MON button.

	END MON
	The end monitored, then the pickup
7	returns to the play start position and the
	standby mode is set. (End Monitor)

NOTE: If the CUE button is pressed during the end monitor operation, the end monitor operation is canceled, the pickup returns to the play start position and the standby mode is set.

12