Denon DN-C640 manual 22

ENGLISH

3. DEVICE OPERATION

ADVANCED CD PLAYBACK	3. Press the PLAY/PAUSE button.
(1) Repeating playback of a desired interval	DISPLAY	A-B	PITCH
	LOCK	END MON	TEXT - INDEX/DIR +
			PUSH
			ENTER
(Single track repeat)			CUE
	CANCEL	SKIP BACK	PLAY/PAUSEPITCH

1.In the Preset menu, set the finish mode to “Stop”, “Next” or “Recue”. (See page 22)

2.Press the REPEAT button on the remote control unit.

•The “REPEAT 1” indicators light on the display and the single track repeat mode is set.

•The disc is played repeatedly.

•The all track repeat mode can also be set by pressing the REPEAT button during playback.

•If the REPEAT button is pressed during program play, the tracks are played repeatedly in the programmed order.

•To cancel the all track repeat mode, press the REPEAT button repeatedly until the “REPEAT” indicator turns off.

3. Use the select knob to select the track to be played				(2) Repeating playback a specific section
repeatedly.					within a track
4. Press the PLAY/PAUSE button.
				(A-B repeat)
DISPLAY	A-B	PITCH		1.	During playback, press the A-Bbutton at the point where
LOCK	END MON	TEXT - INDEX/DIR +	ENTER		you want to start repeated playback (A point).
			PUSH
		CUE
CANCEL SKIP BACK		PLAY/PAUSE	PITCH
					DISPLAY	A-B	PITCH
					LOCK	END MON	TEXT	- INDEX/DIR +	PUSH
• Playback starts.									ENTER
							CUE
• Once the selected track ends, it is played again from the					CANCEL	SKIP BACK		PLAY/PAUSE	PITCH
beginning.
• The single track repeat mode can also be set by pressing					• The “A-” indicator flashes on the display.
the REPEAT button during playback. The current track is
				2. Press the A-Bbutton again at the point where you want
played repeatedly.
• To cancel the single track repeat mode, press the					to end repeated playback (B point).
REPEAT button repeatedly until the “REPEAT 1”indicator					• The “A-B” indicator stops flashing (remaining lit), and
turns off.					the A-B section begins playing repeatedly.
(All track repeat)					• If no B point is set before the current track ends, the end
					of the track is set as the B point.
1. In the Preset menu, set the finish mode to “Continuous”.
				3.	To cancel		A-B	repeat	playback, press the A-Bbutton
(See page 22)
					again.
2. Press the REPEAT button on the remote control unit.
				NOTE:
				• The A-B points must be separated by at least 1 seconds
					time to work.

•The “REPEAT” indicators light on the display and the all track repeat mode is set.

14