3. DEVICE OPERATION

16.Auto sleep mode (Auto Sleep)

You can select the behavior that the servo functions will automatically turn off if no operation is performed for set-up time while in stop, pause or cue.

When in the sleep mode, if the PLAY/PAUSE button is pressed, playback will be started from the beginning of the track in which the sleep mode was set. If the CUE button is pressed, it will standby for the beginning of the track in which the auto sleep was set.

Set value

Processing

 

 

Off

Unit never goes into sleep mode

 

 

30sec

 

10min

Unit will goes into sleep mode if no servo functions occur for longer than the user-

20min

designated time

30min(default)

 

 

 

ENGLISH

17.Eject lock mode (Eject Lock)

This feature allows you to prohibit ejecting a disc during playback

Set value

Processing

 

 

On (default)

Unit will not allow anyone to eject a disc while in the Play Mode

 

 

Off

Unit will allow a disc to be ejected while in the Play Mode

 

 

18.Digital output format (Digital Out)

This allows you to designate the Digital Output format that is sent to both the balanced and unbalanced digital output terminals.

Set value

Processing

Broadcast (default)

Unit outputs AES/EBU formatted digital audio signal to both the balanced DIGITAL OUTPUT jack and the unbalanced DIGITAL OUTPUT jack

Consumer

Unit outputs S/PDIF formatted digital audio signal to both the balanced DIGITAL OUTPUT jack and the unbalanced DIGITAL OUTPUT jack

19.Digital FS (Digital FS)

This feature allows you to set the sampling frequency of the digital audio signal that is sent out the DIGITAL AUDIO outputs.

 

 

Digital audio signal is outputted with below FS

 

 

 

 

 

 

 

 

Set value

 

 

FS of the source audio signal

 

 

 

 

 

 

 

 

 

 

16 kHz

22.05 kHz

24 kHz

32 kHz

44.1 kHz

48 kHz

 

 

 

 

 

 

 

Auto (default)

–

–

–

32 kHz

44.1 kHz

48 kHz

 

 

 

 

 

 

 

32kHz

32 kHz

32 kHz

32 kHz

32 kHz

32 kHz

32 kHz

 

 

 

 

 

 

 

44.1kHz

44.1 kHz

44.1 kHz

44.1 kHz

44.1 kHz

44.1 kHz

44.1 kHz

 

 

 

 

 

 

 

48kHz

48 kHz

48 kHz

48 kHz

48 kHz

48 kHz

48 kHz

 

 

 

 

 

 

 

20.Time Zone (Time Zone)

This feature allows you to select the Time zone. This setting is necessary to display the time correctly. Value of the Time Zone should represent the differences between the UTC(GMT) and your local time.

NOTE:

 

• Turn the power off and on again to make the new settings effective.

 

Items 21-26 refer to the network operation of the unit. See page 34.

 

21. Machine name (Machine Name)

 

22. IP Address setting (IP Address)

 

23. Subnet mask setting (Subnet Mask)

 

24. Default Gateway setting (Gateway)

 

25. DNS server setting (DNS Server)

 

26. Network-Access Password setting (Password)

 

27. Default (Default)

25

Setting this feature allows you to reset all of the unit’s preset items to their default values.