ENGLISH
3. DEVICE OPERATION
Finish mode setting is “Next”
Set value |
| Processing at the end of track | |
|
|
| |
| (Reserved a next track): | Cue at the playback stating position of index 01 of reserved | |
On (default) |
| track | |
| (Not reserved a next track): Cue at the beginning of index 01 of next track | ||
|
| ||
Off | Cue at the beginning of index 01 of next track | ||
|
|
| |
|
|
| |
Finish mode setting is “Recue” |
|
| |
Set value |
| Processing at the end of track | |
|
|
| |
On (default) | (Reserved a next track): | Cue at the beginning of index 01 of reserved track | |
(Not reserved a next track): Cue at the playback starting position | |||
| |||
|
| ||
Off | Cue at the playback starting position | ||
|
|
| |
|
| ||
Finish mode setting is “Continuous” |
| ||
Set value |
| Processing at the end of track | |
|
|
| |
| (Reserved a next track): | Start playback at index 01 of reserved track. If the reserved | |
|
| track is next track of the current track, it will start playback at | |
On (default) |
| index 00. | |
| (Not reserved a next track): Start playback at index 00. If the current track is final track of | ||
|
| the disc, It will stop. | |
|
| ||
Off | Start playback at index 00. If the current track is final track of the disc, It will stop. | ||
|
|
| |
12.Fader start mode (Fader Start)
This feature allows you to decide how the
Set value | Processing |
Play
Unit starts playback when the remote fader pins
Unit starts playback when the remote fader pins
13.Index tally (Index Tally)
This feature allows you to select the processing of INDEX tally pin (17) of the parallel control terminal.
Set value | Processing |
|
|
Index2 (default) | Output index 2 tally signal to INDEX tally pin (17). |
|
|
Index3 | Output index 3 tally signal to INDEX tally pin (17). |
|
|
14.Mono mode (Mono)
This feature allows you to force playback of stereo audio into a mono signal sent out both the L and R terminals
Set value | Processing |
|
|
Off (default) | Output L and R original signals from the output terminals. |
|
|
On | Output mixed L and R stereo signals from the output terminals. |
|
|
15.Playlist playback mode (Play List)
This allows you to turn on or off the ability to play a playlist created in the Web Remote (See Page 32)
Set value | Processing |
|
|
Off (default) | The playlist is ignored and normal playback is possible |
|
|
On | The unit plays back according to the files designated in the playlist |
|
|
24