Denon DN-X300 5FADER START

5FADER START

If the separately sold DN-S5000, DN-S3000, DN-S1000 and etc. players are connected to LINE1, 2, 3 or 4, they can be started using the source input fader (Ch. Fader) or Crossfader, as long as the 3.5 mm stereo mini cords have been connected.

LINE	FADER		FADER	FADER	LINE		FADER
OUT L R		L	R L R PGM2	PGM1	OUT L	R
		LINE4	LINE2

FADER	FADER	FADER		FADER
	PGM1	PGM2
CD player (DN-S3000)			DN-X300	CD player (DN-S3000)

	(1)-2, 5
(1)-2, 5	(2)-2, 5
(2)-1	(2)-1
(1)-1	(1)-1
	(1)-4
(1)-4	(2)-4

Channel Fader Start

Turn the CH 1/2 FADER START switches #8.

1

Move the Channel fader @1of CH-1 or CH-2 control all the way to the bottom.

2

3Set the standby mode on CD player. Use the CH 1/2 FADER

	CONTOUR controls $1to
4	control the Channel fader
	startup curve.

When you want to start the player, move up the Channel fader @1and the CD player

5will begin playing.

NOTE:

•When the CH 1/2 FADER REVERSE switch is set to ON, the Channel fader's operating direction is reversed.

ENGLISH

Crossfader Start

Turn the CROSSFADER START A, B switches #9.

1

Slide the Crossfader @3all the way in direction opposite the source you want to start. (In the following example, startup is done with the CD player connected to PGM1.)

2

3Set the standby mode on CD player. Use the CROSSFADER

	CONTOUR control $3 to
4	control the Crossfader
	startup curve.

When the Crossfader @3is slid in the opposite direction, CD player play will begin.

5

NOTES:

•When the CROSSFADER REVERSE switch is set to ON, the Crossfader's operating direction is reversed.

•Channel Fader Start and Crossfader Start for the same source will not operate simultaneously. You must select from either one. If both CH FADER START and CROSSFADER START A, B switches are ON, priority will be the cross fader.

9