Front Panel Display
1 |
|
| 2 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• Brightness of the display can be adjusted. Refer to “Panel Display” in “Function Setup” on page 36.
1.Displays playback status icon. Refer to the table below.
2.Displays various kinds of information such as title number, elapsed playing time, repeat type, menu type, etc.
Playback Status Icon
Mode
Disc | SD Memory Card |
Playback is in progress
Stop mode
Pause mode
Fast forward mode
Fast reverse mode
— Slow forward mode
Appears while repeat function is set
Examples of Displays during Operation
Display | Description |
Power on
Standby mode
Tray open
Tray is closing
Loading the disc
No disc inserted
No SD Memory Card inserted
This unit cannot read the disc or SD Memory Card inserted.
Stop mode.
Pure direct mode is set to pure direct off.
Pure direct mode is set to front panel display off.
Pure direct mode is set to video signal off.
Pure direct mode is set to video signal and front panel display off.
The total number of the track that has been registered for the program playback and track number currently selected.
The total number of the files that has been registered for the program playback and folder/file number currently selected.
“All Clear” for program playback setting is selected.
•When playing back the disc that contains more than 100 titles, display of the chapter and time on the front panel display will be moved a few dots to the right.
•When the pure direct mode is set to “Disp.Off” or “All Off”, the front panel display gets dimmer in stop mode.
Adjusting the Brightness of the Display
You can adjust the brightness of the display by pressing [DIMMER] repeatedly. The brightness changes as bright Adimmer Aauto each time you press [DIMMER]. If you select auto, the display gets dimmer during playback.
•[DIMMER] is not available when the setup menu is displayed.
•[DIMMER] is not available while the pure direct mode is active.
9