Denon DVD-1800BD Connection to a Device with 2-channelsof Analog Audio Inputs, Connecting the AC cord, DivX®, audio, DTS-CD, [SETUP], BD-video, Disc type, DVD-video, this unit

ENGLISH

Connections

Audio signals output from DIGITAL OUT (COAXIAL)

When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD.< When HDMI is not connected or “Audio Mute” is selected···>

When HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting, the audio signals output from DIGITAL OUT changes depending on the “Digital Out” setting. Refer to the following table.

To set “Digital Out”, press [SETUP], then select “Quick” A“HDMI Audio Out” A“Audio Mute” or “Custom” A“Audio” A“HDMI Audio Out” A“Audio Mute”.

Disc type	Audio recording format	“Digital Out” setting
		Bitstream	LPCM
	Dolby Digital	Dolby Digital	2ch Downmix LPCM
	Dolby Digital Plus	Dolby Digital	2ch Downmix LPCM
BD-video	Dolby TrueHD	Dolby Digital	2ch Downmix LPCM
	DTS	DTS*1	2ch Downmix LPCM
	DTS-HD	DTS*1	2ch Downmix LPCM
	LPCM	2ch Downmix LPCM*1	2ch Downmix LPCM
	Dolby Digital	Dolby Digital	2ch Downmix LPCM
DVD-video	DTS	DTS	2ch Downmix LPCM
	LPCM	2ch Downmix LPCM	2ch Downmix LPCM
DivX®	Dolby Digital	Dolby Digital	2ch Downmix LPCM
	MP3/MP2	2ch LPCM	2ch LPCM
audio CD/ MP3/Windows Media™ Audio		2ch LPCM	2ch LPCM
DTS-CD		DTS	2ch Downmix LPCM

*1 For the BD title with secondary or interactive audio, these audio will be output as Dolby Digital when all the conditions listed below are met:

•When “BD Audio Mode” is set to “Mix Audio Output”.

•When “HDMI Audio Out” is set to “Audio Mute”.

•When “Digital Out” is set to “Bitstream”.

If the BD title does not have secondary or interactive audio, the audio will be output as shown in the table.

•This table applies only when HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting.

Note

•In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set “BD Audio Mode” to “Mix Audio Output” and set “HDMI Audio Out” to “HDMI Multi(LPCM)”.

Cables not included.

Please purchase the necessary cables at your local store.

Connections

Connection to a Device with 2-channels of Analog Audio Inputs

audio	Stereo component
	AUDIO IN	RCA audio cable
	L
	R	AUDIO this unit
		OUT
		L
		R

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

Connecting the AC cord

After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC cord to the AC outlet.

this unit	AC outlet
	AC 120V, 60 Hz
	AC cord

Supplied cables used in this connection are as follows:

• AC cord x 1

Note

• Insert the plugs securely. Incomplete connections will result in the generation of noise.

13

ENGLISH