ENGLISH

Getting

 

 

GTunerH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Symptom

 

 

 

Cause

 

 

 

Countermeasure

 

Page

Started

 

 

Continuous noise

• Antenna

cable

is

not

properly

• Connect

the

antenna

cable

10

 

 

is heard when

connected.

 

 

 

 

 

properly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

receiving FM

 

 

 

 

 

 

 

 

• Connect an outdoor antenna.

Connections

 

 

programs.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

receiving AM

• This may be noise from a TV or

• Turn off the TV.

 

 

 

 

 

 

Hissing or

 

 

 

 

 

 

continuous noise

interference from a radio station.

• Change the position and direction

10

 

 

 

is heard when

 

 

 

 

 

 

 

 

of the AM loop antenna.

 

 

Setup

 

 

programs.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GiPodH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

played.

input source do not match.

 

source.

 

 

 

 

 

Page

 

 

 

Symptom

 

 

 

Cause

 

 

 

Countermeasure

 

 

 

 

iPod cannot be

• Device you want to play and set

• Select

an

appropriate

input

18

Setting

 

 

 

• Cable is not properly connected.

• Reconnect.

 

 

 

 

10

 

 

 

adapter

is

not

connected to

AC adapter into a power outlet.

 

 

 

 

• Control

Dock

for

iPod’s

AC

• Plug the Control Dock for iPod’s

Timer the

 

 

 

power outlet.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GUSBH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Other

 

 

Symptom

 

 

 

Cause

 

 

 

Countermeasure

 

Page

 

 

When a USB

• The set cannot recognize a USB

• Check the connection.

 

 

11

 

 

 

 

 

Functions

 

 

memory device

memory device.

 

 

 

 

 

 

 

 

 

 

 

 

 

is connected,

• A

USB

memory

device

not

• Connect a USB memory device

 

 

 

 

 

 

“USB” is not

conforming to mass storage class

conforming

to

mass

storage

 

 

 

 

displayed.

or MTP standards is connected.

class or MTP standards.

 

 

Troubleshooting

 

 

 

• A

USB

memory

device

that

• This is not a malfunction. DENON

 

 

 

via USB hub.

 

 

 

 

directly to the USB port.

 

 

 

 

 

 

the set cannot recognize is

does not guarantee that all USB

 

 

 

 

 

connected.

 

 

 

 

 

memory devices will operate or

 

 

 

 

 

 

 

 

 

 

 

 

 

receive power.

 

 

 

 

 

 

 

 

• USB memory device is connected

• Connect the USB memory device

 

 

 

 

 

 

 

 

 

 

 

 

Files on a USB

• USB memory device is in format

• Set the

format to

FAT16 or

Specifications

 

 

 

 

memory device

other than FAT16 or FAT32.

 

FAT32. For details, refer to the

 

 

 

 

 

 

 

 

 

cannot be played.

 

 

 

 

 

 

 

 

USB memory device’s operating

 

 

 

 

 

 

 

 

 

 

 

 

 

instructions.

 

 

 

 

 

 

 

 

 

• USB memory device is divided

• When

divided

into

multiple

 

 

 

 

into multiple partitions.

 

 

partitions, only files stored in the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

top partition can be played.

 

 

 

 

 

• Files are

stored

in

a

non-

• Record the files in a compatible

20

 

 

 

 

compatible format.

 

 

 

format.

 

 

 

 

 

 

 

 

 

 

• You are attempting to play a file

• Files that are copyright protected

20

 

 

 

 

that is copyright protected.

 

cannot be played on this set.

 

Specifications

nAudio section

• Power amplifer

 

 

Rated output:

30 W + 30 W (6 Ω/ohms, 1 kHz T.H.D 10 %)

nTuner section

 

 

Reception frequency range:

FM: 87.5 MHz ~ 107.9 MHz

AM: 520 kHz ~ 1710 kHz

Receiving sensitivity:

FM: 1.5 μV/75 Ω/ohms

AM: 20 μV

FM stereo separation:

35 dB (1 kHz)

 

nCD section

 

 

Playback frequency response:

2 Hz ~ 20 kHz

 

Wow & flutter:

Below measurable limits (± 0.001%)

 

Sampling frequency:

44.1 kHz

 

nClock/Timer section

 

 

Clock method:

Crystal oscillator (Within 1 ~ 2 minutes per month)

Timer:

Everyday/Once timer: One system each

 

Sleep timer: 90 minutes, maximum

 

nGeneral

 

 

Power supply:

AC 120 V, 60 Hz

 

Power consumption:

65 W

 

 

Approx. 0.3 W (standby)

 

Maximum external dimensions:

210 (W) x 115 (H) x 308.5 (D) mm (8-17/64” x 4-33/64” x 12-9/64”)

Weight:

4.3 kg (9 lbs 7 oz)

 

nRemote control unit (RC-1097)

Remote control method:

IR pulse method

Power supply:

R03/AAA Type (two batteries)

Maximum external dimensions:

49 (W) x 220 (H) x 24 (D) mm (1-59/64” x 8-21/32” x 15/16”)

Weight:

110 g (Approx. 3 oz) (including batteries)

bFor purposes of improvement, specifications and design are subject to change without notice.

26