TUNER Playback

Tuning in Broadcast Stations

Connect the antenna beforehand (vpage 10).

1Press [TUNER] or <BAND/2> to select the reception band.

FM AUTO FM MONO AM

GAbout the displayH

When FM AUTO is selected∙∙∙∙∙∙∙∙∙∙∙∙∙∙“AUTO” is displayed. When FM MONO is selected∙∙∙∙∙∙∙∙∙∙∙∙“MONO” is displayed. When AM is selected∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙The reception mode is not

displayed.

2Use <8/–, +/9> or [TU –, TU +] to select thereception band.

When a station is received, the “TUNED” indication will light.

•If the function is set to something other than “TUNER”, press [TUNER] to switch the function to “TUNER” (vpage 24 “Auto Function Selector Function”).

•The function can also be switched to “TUNER” using SOURCE.

nTo Tune Automatically

Press and hold in <8/–,+/9> or [TU –,TU +] to automatically search and tune in broadcast stations.

b Stations whose signal is weak cannot be tuned in.

nTo Stop Auto Tuning

Press <8/–,+/9> or [TU –,TU +].

nTo Tune Manually

The reception frequency switches each time <8/–,+/9> or [TU –,TU +] is pressed.

A humming sound may be heard when using a TV nearby while receiving AM programs. If this happens, move the system as far from the TV as possible.

About the FM Broadcast Reception Status Display

The “ST” indicator lights when receiving stereo broadcasts.

If the signal is weak and stable stereo reception is not possible, select “FM MONO” to receive in monaural.

About Switching the Tuning Mode and Preset Mode

Use <8/–,+/9> to perform the tuning and preset channel operations. Switch to the mode to be operated before operating.

nTo switch to the preset mode

Press <+/9> while pressing <BAND/2>.

The “PRESET” indicator flashes for about 5 seconds.

nTo switch to the tuning mode

Press <8/–>while pressing <BAND/2>.

The “TUNING” indicator flashes for about 5 seconds.

ENGLISH

Automatically Presetting FM Stations (Auto Preset)

Up to 40 stations can be preset.

Auto preset is not possible with AM broadcast stations.

1Press [TUNER] to select “FM AUTO” or “FM MONO”.

2Press and hold in MENU/SET. The “AUTO PRESET” is displayed.

3Press MENU/SET again.

“Search” flashes and auto presetting starts.

Broadcast stations whose antenna signal are weak cannot be preset automatically. If you wish to preset such stations, tune them in manually.

nTo Cancel Auto Presetting

Press <BAND/2> or [2].

The “Search” indicator turns off.

Presetting FM/AM Stations Manually

Up to 40 stations (total for AM and FM) can be preset.

1Tune in the station.

2Press [ENTER/MEMO].

The smallest non-registered preset number flashes.

3Use <8/–, +/9>, [CH –, CH +] or [op] to select the number, then press [ENTER/MEMO].

The preset number, reception band and reception frequency are displayed.

Specifications Troubleshooting Functions Other Timer the Setting Playback Setup Connections Started Getting

17