Moving the Unit
Unlock the casters and push the MovinCool unit, using the side handles, to a flat, level surface and set the casters back to the LOCKED position.
FRONT AND BACK HANDLES
UNLOCKED
LOCKED
Plugging in the Unit
•Check the prongs and surface of the power cord plug for dust/dirt. If dust and/or dirt are present, wipe off with a clean, dry cloth.
•Check the power cord, plug and prongs for damage or excess play. If any damage or excess play is found, contact your MovinCool reseller for repair.
•Fully insert plug into the A/C outlet.
WARNING:
•If the power cord or plug is damaged, repair should only be performed by quali- fied electrical personnel.
•Do not connect/disconnect the power cord or attempt to operate buttons with wet hands. This could result in electrical shock.
CAUTION: The AC outlet (208/230 VAC Single Phase, 60Hz) needs to be rated at 30A or higher. Do not share the outlet with any other instrument or equipment.
NOTE:
•Make sure the AC outlet is free of dirt, dust, oil, water, or any other foreign mat- ter.
•The Office Pro 36 model is equipped with an approved NEMA plug configuration
3
