48
[4.2] Setting the message version[4.1] Setting an execution program
Selecting "1: EXECUTE PROGRAM" on the SET
SYSTEM menu calls up the screen shown at left.
Highlighted is the current setting.
Use the * and * keys to move the cursor to a
desired execution program to be run when the
power is applied, and then press the ENT key.
To return to the SET SYSTEM menu, press the
C key.
If no program files are stored in the memories, the
screen shown at left will appear.
To return to the SET SYSTEM menu, press the C
key.
SET EXECUTE PROGRAM
SAMPLE01.PD3
SAMPLE02.PD3
SAMPLE03.PD3
SAMPLE04.PD3
SET EXECUTE PROGRAM
******************
* NO FILE EXISTS *
******************
Selecting "2: DISPLAY" on the SET SYSTEM menu
calls up the screen shown at left.
Highlighted is the current setting.
MESSAGE: Switches the message version to En-
glish or Japanese for system error
messages and indications on the
LCD contrast, beeper volume, beeper
& vibrator switching, and battery
voltage level screens. (The default
is the message version that you se-
lected in the initializing sequence.)
Select a desired setting by using the * and *
keys.
Press the ENT key.
To return to the SET SYSTEM menu, press the C
key.
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of , ,
, and keys, respectively
SET DISPLAY
MESSAGE
English Japanese