Denso OFFICE PRO 12, OFFICE PRO 24 operation manual Choosing an Installation Site

Models: OFFICE PRO 24 OFFICE PRO 12

1 76
Download 76 pages 45.69 Kb
Page 10
Image 10

INSTALLATION

Choosing an Installation Site

￿CAUTION: Following are some precautions to consider before choosing your installation site. Please review carefully as improper installation may result in personal injury or damage to the unit.

Do not use the unit in areas where leakage of flammable gas may occur.

Do not use the unit in areas where it will be exposed to rain or water.

Do not use the unit in an atmosphere of excessively corrosive gas or vapor.

Do not use in areas where the temperature is outside the allowable operating range.

Do not install the unit in sloping areas. The unit may move or topple over even if the casters are set to the LOCKED position.

Install the unit in areas that can withstand the weight of the unit. The Office Pro 12 unit weighs approximately 200 lbs (91 kg) and the Office Pro 24 weighs approximately 245 lbs. (111 kg) (when the drain tank is full of water).

Allow 18 inches of unobstructed airflow for both the air inlets and outlets.

Do not use the unit above 95˚F 50% RH.

4

Page 10
Image 10
Denso OFFICE PRO 12, OFFICE PRO 24 operation manual Choosing an Installation Site