OPERATION (cont.)
How to Set a Program
➀Setting a START TIME
Press the Program SET button. The Program SET button and START TIME LEDs will illuminate. Press the HRS and MIN buttons to set the START TIME.
➁Setting an END TIME
Press the Program SET button until the END TIME LED illuminates. Press the HRS and MIN buttons to set the END TIME.
➂Setting the CLOCK TIME
Press the Program SET button until the SET CLOCK LED illumi- nates. Press the HRS and MIN buttons to set the current clock time into the unit.
NOTE: The AM/PM LED will change with the HRS button.
➃Programming the Temperature SET POINT
Press the Program SET button until the current SET POINT tem- perature display begins to flash on and off. Select a new desired SET POINT temperature (65ºF – 95ºF) by pressing the SET TEMP buttons (▼/▲).
➄Programming the Fan Speed
Press the Program SET button until one of the Fan Speed button LEDs (HIGH/LOW) begin to flash. This is the current programmed Fan Speed. To change the programmed Fan Speed, simply press the other Fan Speed button.
➅Exiting the Program SET Function
After changing any of the above settings, continue pressing the Program SET button until the Program SET button LED turns off. The unit will then return to the previous mode.
➆Activating/Deactivating a Preset Program
Press the Program RUN button to activate/deactivate a preset program. The Program RUN LED will illuminate when activated.
11