3-6
Cisco 170 Series Hardware Installation Guide
OL-28365-01
Chapter
Step 2 Align the slide rail to the rear rack post. Secure it with two of the included Phillips pan-head screws (see
F in Figure 3-1).
Step 3 Align the other slide rail to the rack by repeating the previous steps.
Step 4 Proceed to the “Installing the Appliance” section on page 3-6.
Installing the ApplianceStep 1 Align the inner slide rails to the outer slide rails. Install the inner slide rails into the outer slide rails until
they lock into place.
330875
330872
330889