3-2
Cisco 170 Series Hardware Installation Guide
OL-28365-01
Chapter
Step 2 Use a Phillips screwdriver to secure the inner slide rail with one Phillips flat-head screw (See B in
Figure 3-1).
Step 3 Secure the other inner slide rail to the appliance by repeating the previous steps.
Verifying the Rack Type
Step 1 The slide rails are pre-assembled for square hole racks. Use the following steps for the different rack
types:
• For square hole racks, see the “Attaching the Outer Slide Rail to Round and Square Hole Racks”
section on page 3-4.
• For round hole racks, see the “Securing Round Hole Racks” section on page 3-3.
• For threaded hole racks, see the “Securing Threaded Hole Racks” section on page 3-3.
The following figure shows the slide rail with square hole rack inserts.
330905
330904
330903