3-3
Cisco 170 Series Hardware Installation Guide
OL-28365-01
Chapter
Securing Round Hole Racks
Step 1 Using a Phillips head screwdriver, remove the square insert from the rear of the rail. Retain the two
Phillips head screws.
Step 2 Remove the square insert from the front of the rail. Retain the two Phillips head screws.
Step 3 Align the round hole insert (see C in Figure 3-1) to the rear of the rail, and secure it with two of the saved
screws.
Step 4 Align the round hole insert (see C in Figure 3-1) to the front of the rail over the hooks, and secure it with
two of the saved screws.
Step 5 Proceed to the “Attaching the Outer Slide Rail to Round and Square Hole Racks” section on page 3-4.
Securing Threaded Hole Racks
Step 1 Using a Phillips head screwdriver, remove the square hole insert from the rear of the rail.
330884
330882
330881
330880