Desa 000 Btu/Hr), 44 kW (150, 8 (30, 5 (70, 4 (90, 20, 26 Ventilation Operation, To Start Heater

VENTILATION

OPERATION

WARNING

WARNING ICON G 001

Follow the minimum fresh, outside air ventilation requirements. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Provide proper fresh, outside air ventilation before running heater.

Provide a fresh air opening of at least 2800 square cm (three square feet) for each 29,3 kW (100,000 Btu/Hr) rating. Provide extra fresh air if more heaters are being used.

Example: A 44 kW (150,000 Btu/Hr) heater requires one of the following:

•a 4,88 m (16 foot) wide two-car garage door raised 8,59 cm (3.38 inches)

•a 2,75 m (9 foot) wide single-car garage door raised 15,24 cm (6 inches)

•two, 76,20 cm (thirty-inch) wide windows raised 28 cm (11 inches)

WARNING

WARNING ICON G 001

Review and understand the warnings in the Safety Information Section. They are needed to safely operate this heater. Follow all local codes when using this heater.

To Start Heater

1.Follow all ventilation and safety information.

2.Fill fuel tank with kerosene or No. 1 fuel oil.

3.Attach fuel cap.

4.Plug power cord of heater into standard 230 volt/50 hertz, grounded (earthed) outlet. Use an extension cord if needed. Use only a grounded (earthed) exten- sion cord.

Extension Cord Wire Size Requirements

Up to 100 feet (30.5 meters) long, use 16 AWG (1.0 mm2) conductor

101 to 200 feet (30.6 to 61 meters) long, use 14 AWG (1.5 mm2) conductor

Heater will start when power cord is plugged into outlet. If not, push in flame- out control reset button (see Figures 6 thru 8).

Flame-Out	Flame-Out
Control
Reset	Control
Button	Reset
	Button

Figure 6 - Flame-Out Control Reset	Figure 7 - Flame-Out Control Reset
Button, 8,8/20,5 kW (30/70,000 Btu/Hr)	Button, 26,4 kW (90,000 Btu/Hr)
Models	Model
	Continued

7

099623