INSTALLATION
Continued
5.Place log #5 (small front log) onto the front left part of grate making sure notches fit over prongs of grate (see Figure 22).
6.Place log #6 onto two pins on left side of back and front logs (see Figure 22).
6
5
Figure 22 - Installing Logs #5 and #6
(CD36M-A Series Shown)
Model CD42M-A Series
1.Place log #1 (small base log) onto pin on left side of grate extension (see Figure 23).
2.Rest left side of log #2 (front log) on top of log #1 and right side onto pin located on right side of grate extension (see Figure 24).
3.Place log #3 (rear log) onto pins on rear of grate (see Figure 25).
4.Place log #4 (crossover log) onto pins from both logs #2 and #3 (see Figure 26).
1
Figure 23 - Installing Log #1, Model
CD42M-A
2
5.Place log #5 (top log) onto right pin of front log (#2) and smooth surface of rear log (#3). Make sure it is seated properly (see Figure 27).
6.Place log #6 (left log) on left pin of front log (#2) and smooth surface of rear log (#3). Make sure it is seated properly (see Figure 28).
7.Place log #7 (right log) on right pin of top log (#5). Make sure it is seated properly (see Figure 28).
3
Figure 25 - Installing Log #3, Model
4
Figure 26 - Installing Log #4, Model
5
Figure 27 - Installing Log #5, Model
6
7
Figure 24 - Installing Log #2, Model
Figure 28 - Installing Logs #6 and #7,
Model CD42M-A
12 | www.desatech.com |
