Desa CD36M-A2 Continued, For Your Safety Read Before Lighting, air and will settle on the floor

BURNER FLAME

ADJUSTMENT

Continued

If adjustment is necessary, you can restore the proper flame setting by loosening the air shutter screw and rotating the air shutter until proper setting is achieved (see Figure 31). The correct shutter openings are as follows:

	Tube Burner		Pan Burner
Model	Natural	Propane/	Natural	Propane/
		LP		LP
CD32M	0.188"	Max.	—	—
CD36M-A	0.188"	Max	—	—
CD42M-A	0.188"	0.313"	0.188"	0.500"

WARNING:Improperinstalla- tion, adjustment, alteration, ser- vice or maintenance can cause injury or property damage. Refer to this manual for assistance. Consult a qualified installer for additional information.

Adjustment	Burner Pan
Screw
Firebox	Manifold
	Air Shutter
Bottom
	Opening

OPERATING FIREPLACE OPERATION GUIDELINES

•When used for the first time, the fireplace may emit a slight odor for about 16 to 24 hours. This is normal and is due to the “curing” of the logs and the “burn-in” of internal paint and lubricant used in the manufacturing process.

•Keep compartments, logs, burners and area sur- rounding logs clean by vacuuming and brushing at least twice a year or as necessary.

•Turn off gas and remote switch before servicing appliance. Any safety screen or guard removed for servicing the fireplace must be replaced prior to operation.

•Have a qualified agency periodically inspect vent system at the start of each heating season for any obstruction which will hinder its normal operation. Never obstruct the flow of combus- tion and ventilation air. Keep the front of the fireplace clear of all obstacles and materials.

FOR YOUR SAFETY

READ BEFORE LIGHTING

WARNING: If you do not fol- low these instructions exactly, a fire or explosion may result causing property damage, per- sonal injury or loss of life.

A.	This appliance has a pilot which must be
	lighted by hand. When lighting the pilot,
	follow these instructions exactly.
B. BEFORE LIGHTING smell all around the
	appliance area for gas. Be sure to smell next
	to the floor because some gas is heavier than

Adjustment Screw

Air Shutter

Opening

Firebox

Bottom

Burner

Gas Line

Burner Tube

Manifold

air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electric switch; do not

use any phone in your building.

• Immediately call your gas supplier from

a neighborʼs phone. Follow the gas

supplierʼs instructions.

• If you cannot reach your gas supplier, call

the fire department.

C. Use only your hand to push in control knob.

Burner

Gas Line

Figure 31 - Air Shutter Adjustments

Never use tools. If the knob will not push

in or slide by hand, donʼt try to repair it,

call a qualified service technician. Force

or attempted repair may result in a fire or

explosion.

14 www.desatech.com 111916-01F