OWNER’S MANUAL

INSTALLATION

Continued

Mantel Clearances for Built-In Installation

If placing mantel above built-in fireplace, you must meet minimum clearance between mantel shelf and top of fireplace opening.

NOTICE: Surface temperatures of adjacent walls and mantels be- come hot during operation. Walls and mantels above the firebox may become hot to the touch. If installed properly, these tempera- tures meet the requirement of the national product standard. Fol- low all minimum clearances shown in this manual.

NOTICE: If your installation does not meet the minimum clearances shown, you must do one of the following:

raise the mantel to an accept- able height

remove the mantel

Note: All vertical

 

Mantel Shelf

10"

 

 

 

 

measurements

 

 

 

 

are from top of

8"

 

 

 

 

 

 

 

 

fireplace

6"

 

 

 

 

opening to

 

 

 

 

2 1/2"

 

 

 

 

bottom of

 

 

 

 

mantel shelf.

 

 

 

 

 

Minimum Non-

 

 

 

 

 

Combustible

 

 

 

 

 

Material

13"

16"

19"

21"

 

 

 

 

 

 

 

 

 

Figure 9 - Minimum Mantel Clearances for Built-In Installation

REMOVING BRICK LINER RETAINER

1.Using Phillips screw driver, remove 2 screws attaching brick liner retainers to vertical sides.

2.Remove brick liner retainers and discard. Replace 2 screws into vertical sides.

ASSEMBLING BRASS TRIM

(Brass trim shipped with mantel)

1.Remove packaging from three pieces of brass trim.

2.Locate two adjusting plates with set screws, and two shims in the hardware packet.

3.Align shim under adjusting plate as shown in Figure 10.

4.Slide one end of adjusting plate/shim in slot on mitered edge of top brass trim (see Figure 10).

5.Slide other end of adjusting plate/shim in slot on mitered edge of side brass trim (see Figure 10).

6.While firmly holding edges of brass trim together, tighten both set screws on the adjusting plate with slotted screwdriver.

7.Repeat steps 1 through 6 for other corner.

8.Set brass assembly aside for later in- stallation.

 

Slot

Top

Set Screws

Brass

 

 

 

Trim

 

Shim

Mitered

 

Edge

 

 

Adjusting

 

Side

Plate

 

 

Brass

Slot

 

 

Trim

 

 

Figure 10 - Assembling Brass Trim

OPTIONAL MANTEL

INSTALLATION

Note: Refer to instructions provided with the mantel for assembly instructions. Refer to instructions below for system installa- tion. If using blower accessory (see Acces- sories, page 26), see installation instruc- tions on pages 10 and 11.

1.Choose location for fireplace and in- stall gas supply line.

2.Remove screen from fireplace by remov- ing screws in each end of screen rod (see Figure 11). Hold screen rod cover while removing five hex head screws under- neath hood (see Figure 12). Carefully lift and pull out hood (see Figure 13).

3.Assemble brass trim kit. See Assem- bling Brass Trim, column 2.

4.Place brass trim on the shoulder screws located on the side and top of the fireplace. Firmly snap the brass trim over the shoul- der screws on fireplace (see Figure 14, page 10).

5.Place mantel base close to wall in de- sired fireplace location.

6.Install gas line. See Connecting To Gas Supply, page 12

7.Carefully place fireplace on mantel base and center left to right. Check for gas leaks. See Checking Gas Connections, page 14.

8.Refer to instructions provided with the mantel for permanent attachment to wall.

9.Slide mantel around fireplace. Be care- ful not to damage wall or mantel.

Figure 11 - Removing Screen

Hood

Screen

Rod

Cover

Screw

Figure 12 - Removing Hood Screws

Mantel Screw

Location

Figure 13 - Removing Hood

Continued

107187

9

For more information, visit www.desatech.com

Page 9
Image 9
Desa CF26PT installation manual Removing Brick Liner Retainer, Assembling Brass Trim, Optional Mantel Installation

CF26PT specifications

Desa CF26PT is a modern and efficient heating solution designed for residential and commercial spaces, providing comfort and convenience in various environments. This appliance stands out with its remarkable features that cater to diverse user needs.

One of the main features of the Desa CF26PT is its powerful heating capacity. With an output of up to 26,000 BTUs, it is capable of warming large areas quickly and effectively. This makes it an ideal choice for homes with open floor plans or larger spaces that require consistent warmth during colder months.

The technology integrated into the Desa CF26PT is another defining characteristic. The unit employs advanced heating technology, ensuring that it operates efficiently and reliably. This not only maximizes performance but also minimizes energy consumption, making it a cost-effective option for consumers. The inclusion of a multi-directional vent ensures that heat is distributed evenly throughout the space, eliminating cold spots and providing a comfortable environment.

In terms of design, the Desa CF26PT is compact and versatile, allowing it to fit seamlessly into various room styles. Its aesthetic appeal ensures that it complements existing décor while offering practical functionality. The unit is also designed for easy installation, with straightforward guidelines that allow users to set it up quickly without needing professional assistance.

Safety features are paramount in the design of the Desa CF26PT. It comes equipped with an automatic shut-off feature that activates in the event of overheating, ensuring peace of mind for users. Additionally, the unit incorporates a sturdy construction, making it durable and capable of withstanding the rigors of daily use.

User-friendly controls are another highlight of the Desa CF26PT. The intuitive interface allows users to adjust settings easily, ensuring personalized comfort. Whether it's choosing the desired temperature or setting up a timer, the functionality enhances the user experience, making it accessible for individuals of all ages.

In summary, the Desa CF26PT stands out as a reliable heating solution, offering power, efficiency, and safety in a stylish, compact design. Its advanced technology, user-friendly operation, and robust safety features make it a prominent choice for those seeking effective heating solutions in their spaces.