OWNER’S MANUAL
INSPECTING
BURNERS
Check pilot flame pattern and burner flame patterns often.
PILOT FLAME PATTERN
Figure 25 shows a correct pilot flame pat- tern. Figure 26 shows an incorrect pilot flame pattern. The incorrect pilot flame is not touching the thermocouple. This will cause the thermocouple to cool. When the thermocouple cools, the heater will shut down.
If pilot flame pattern is incorrect, as shown in Figure 26
•turn heater off (see To Turn Off Gas to Appliance, page 15)
•seeTroubleshooting, pages 19 through 21
Pilot Burner | Thermocouple |
Figure 25 - Correct Pilot Flame Pattern
Pilot Burner
Thermocouple
Figure 26 - Incorrect Pilot Flame Pattern
FRONT BURNER FLAME PATTERN
Figure 27 shows correct front burner flame pattern. Figure 28 shows incorrect front burner flame pattern. The incorrect burner flame pattern shows yellow tipping at top of blue flame.
WARNING: If yellow tipping occurs, your heater could pro- duce increased levels of carbon monoxide. If front burner flame pattern shows yellow tipping, follow instructions at bottom of this page. Yellow flame on rear burner is normal.
NOTICE: Do not mistake orange flames with yellow tipping. Dirt or other fine particles are burned by heater, causing brief patches of orange flame.
If front burner flame pattern is incorrect, as shown in Figure 28
•turn heater off (see To Turn Off Gas to Appliance, page 15)
•seeTroubleshooting, pages 19 through 21
Figure 27 - Correct Front Burner Flame Pattern
Yellow Tipping At Top
of Blue Flame
Figure 28 - Incorrect Front Burner Flame Pattern
104417 | 17 |
