Manuals / Desa / Household Appliance / Indoor Fireplace

Desa CGFP28NT installation manual Thermostat Control Operation, Manual Lighting Procedure

Models: CGFP28NT CGFP28N

1 32
Download 32 pages 6.41 Kb
Page 18
Image 18

CGFP28N and CGFP28NT

UNVENTED (VENT-FREE) NATURAL GAS FIREPLACE

OPERATING

FIREPLACE

Continued

THERMOSTAT

CONTROL OPERATION

You can set the thermostat control knob to any comfort level between HI and LO. The thermostat will gradually modulate the heat output and flame height from higher to lower settings, or pilot, in order to maintain the comfort level you select. The ideal comfort setting will vary by household depending upon the amount of space to be heated, the output of the central heating system, etc.

Note: Selecting the HI setting will cause the burner to remain on without modu- lating down in most cases.

MANUAL LIGHTING

PROCEDURE

1.Follow steps 1 through 5 under Light- ing Instructions, page 17.

2.Depress control knob and light pilot with match.

3.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob. Now follow step 8 under Lighting Instruc- tions, page 17.

Variable Manually-Controlled Model CGFP28N

FOR YOUR SAFETY

READ BEFORE

LIGHTING

WARNING: If you do not fol- low these instructions exactly, a fire or explosion may result caus- ing property damage, personal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas sup- plier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician or gas supplier. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been un- der water.

LIGHTING

INSTRUCTIONS

WARNING: You must oper- ate this fireplace with the fire- place screen in place. Make sure fireplace screen is installed be- fore running fireplace.

NOTICE: During initial operation of new fireplace, burning logs will give off a paper-burning smell. Orange flame will also be present. Open window to vent smell. Operate fireplace on HI position to burn off odor. This will only last a few hours.

1.STOP! Read the safety information in second column.

2.Make sure manual shutoff valve is fully open.

3.Turn control knob clockwise to the OFF position.

4.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety in- formation above. If you don’t smell gas, go to the next step.

5.Slightly depress and turn control

knob counterclockwise C-clockwiseto the PILOT position. Press in control knob for five (5) seconds (see Fig- ure 42).

Note: If running fireplace for first time, there will be air in gas line. You may need to press in control knob for 30 seconds or longer. This will allow air to bleed from the gas system.

•If control knob does not pop out when released, contact a qualified service person or gas supplier for repairs.

6.Continue pressing control knob in. Press and release ignitor button. This will light pilot. The pilot is attached to the front burner. If needed, keep press- ing ignitor button until pilot lights.

Note: If pilot does not stay lit, con- tact a qualified service person or gas supplier for repairs. Until repairs are made, light pilot with match. To light pilot with match, see Manual Light- ing Procedure, page 19.

7.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

Note: If pilot goes out, repeat steps 3 through 7.

8.Slightly depress and turn control

knob counterclockwise to the HIGH position. Both burners should light. Set control knob to de- sired heat setting.

Control Knob

IGNITOR

Ignitor Button

Figure 42 - Control Knob and Ignitor Button Location

Ignitor Electrode

Thermocouple

Pilot Burner

Figure 43 - Pilot

18

103413

Page 17 Page 19
Page 18
Image 18
Desa CGFP28NT Thermostat Control Operation, Manual Lighting Procedure, Variable Manually-Controlled Model CGFP28N
Page 17 Page 19

CGFP28NT, CGFP28N specifications

The Desa CGFP28NT and CGFP28N are state-of-the-art gas fireplaces designed to enhance the ambiance and comfort of any living space. These models are recognized for their combination of aesthetic appeal and advanced technology, providing users with a reliable and efficient heating solution.

One of the main features of both the CGFP28NT and CGFP28N is their sleek design, which seamlessly integrates into various décor styles. Their clean lines and modern look allow them to serve as a focal point in the room while providing warmth and comfort. The large viewing windows offer an unobstructed view of the flames, creating an inviting atmosphere.

Technologically, both models are equipped with the latest innovations to ensure optimal performance. The CGFP28NT features an advanced electronic ignition system, which guarantees a quick and reliable start every time. This system minimizes gas usage and allows for consistent temperature control, making it both environmentally friendly and cost-effective.

The CGFP28N is designed with a unique heat exchanger that maximizes heat output while maintaining safety. This technology ensures that the fireplace operates efficiently, distributing warmth evenly throughout the room without overheating the unit itself. Additionally, both models incorporate a variable flame control feature, allowing users to adjust the intensity of the fire according to their needs.

Another key aspect of the CGFP28NT and CGFP28N is their user-friendly interface. Both models come with a remote control, enabling users to operate the fireplace from the comfort of their couch. This added convenience is paired with straightforward installation requirements, making it accessible for a wide range of customers.

Safety is a top priority for Desa, and these models feature an automatic shut-off valve that activates in case of any irregularities, ensuring peace of mind for homeowners. They also have a durable construction that withstands the test of time, making them a wise investment for those seeking a dependable heating source.

In summary, the Desa CGFP28NT and CGFP28N gas fireplaces offer a perfect blend of style, technology, and safety. With their eye-catching designs, advanced features, and user-friendly operation, they are an excellent choice for anyone looking to enhance their home with the warmth and beauty of a gas fireplace.