Desa CGG3630N Product Identification, Product Features, Local Codes, Unpacking, Operation

Models: CGG2618N CGG3324N(T) CGG3630N

1 28
Download 28 pages 52.71 Kb
Page 3
Image 3
OWNER’S MANUAL

OWNER’S MANUAL

PRODUCT

IDENTIFICATION

Bottom Mid

 

Log (#2)

Top Log (#4)

 

Rear Log (#1)

Rear

Burner

Piezo

Ignitor

Front Log (#3)

Front Burner

Control Knob

Base Assembly

Figure 1 - Vent-Free Gas Log Heater

PRODUCT

FEATURES

OPERATION

This heater is clean burning. It requires no outside venting. There is no heat loss out a vent or up a chimney. Heat is generated by realistic, dancing yellow flames. This heater is designed for vent-free operation with flue damper closed. It has been tested and ap- proved to ANS Z21.11.2 standard for unvented heaters. State and local codes in some areas prohibit the use of vent-free heaters. Non-thermostat models may also be operated as a vented decorative (ANS Z21.60) product by opening flue damper.

SAFETY PILOT

This heater has a pilot with an Oxygen Detection Safety Pilot System (ODS). The ODS/pilot is a required feature for vent-free room heaters. The ODS/pilot shuts off the heater if there is not enough fresh air.

PIEZO IGNITION SYSTEM

This heater has a piezo ignitor. This system requires no matches, batteries, or other sources to light heater.

LOCAL CODES

Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANS Z223, also known as NFPA 54*.

*Available from:

American National Standards Institute,Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

Note: Where listed vented decorative logs are required, thermostat models are not per- mitted.

UNPACKING

PRODUCT CAUTION: Do not remove the metal data plates from the grate assembly. The data plates contain important product information.

1.Remove logs and heater base assem- bly from carton. Note: Do not pick up heater base assembly by burners. This could damage heater. Always handle base assembly by grate.

2.Remove all protective packaging ap- plied to logs and heater for shipment.

3.Check all items for any shipping dam- age. If damaged, promptly inform dealer where you bought heater.

103424

3

Page 3
Image 3
Desa CGG3630N, CGG3324N(T) Product Identification, Product Features, Local Codes, Unpacking, Operation, Safety Pilot