Product
Identification
ELECTRONIC IGNITOR
(Remote-Ready Models Only)
This heater has an electronic ignitor to light heater fuel supply.
Brick
Liners
Screen
Log
Control
Knob
Piezo 
Ignitor
Access
Door
Brick
Liners
Screen
Log
Control
Knob
Remote
Control 
Electronic
Ignitor
Access Door
Figure 1 - Vent-Free Mini Compact
Fireplace
Product Features
Safety Pilot
This fireplace has a pilot with an Oxygen Deple- tion Sensing (ODS) safety shutoff system. The ODS/pilot is a required feature for
Optional Remote
Control Accessories
(For Remote-Ready Models Only)
There are four optional remote controls that can be purchased separately for
•wall switch
•
•wall thermostat
•
See Accessories, page 34.
Assembly
WARNING: Always have screen in place before operating fireplace. This prevents exces- sive temperatures on fireplace surfaces.
WARNING: Failure to posi- tion the parts in accordance with these diagrams or failure to use only parts specifically approved with this fireplace may result in property damage or personal injury.
Assembling Fireplace
Tools Required:
•Phillips screwdriver
•5/16" hex wrench
•slotted screwdriver
•scissors
1.Remove two screws that hold fireplace screen in place for shipping. These screws are lo- cated near top of screen. Discard screws. Lift fireplace screen up and pull out to remove (see Figure 2, page 6). Set screen aside until installation has been completed.
2.Remove all packaging from inside of unit.
3.Remove bubble wrap from logs and discard.
4.Check installation of brick liners. Brick lin- ers are in four pieces: 2 sides, 1 back and 1 top.
