OPERATING

4. Wait five (5) minutes to clear out any gas. Then smell for gas, including

near the floor. If you smell gas, STOP! Follow “B” in the safety information

HEATER

at the top of page 12. If you don’t smell gas, go to the next step.

Continued

5. Press in control knob and turn counterclockwise

C-clockwise to the PILOT

 

 

position. Keep control knob pressed in for five (5) seconds (see Figure 15,

 

page 16).

 

 

Note: You may be running this heater for the first time after hooking up

 

to gas supply. If so, the control knob may need to be pressed in for 30

 

seconds. This will allow air to bleed from the gas system.

 

• If control knob does not pop up when released, contact a qualified

 

service person or gas supplier for repairs.

 

 

6. With control knob pressed in, push down and release ignitor button. This

 

will light pilot. The pilot is attached to the front of burner. The pilot can be

 

seen through the glass panel. If needed, keep pressing ignitor button until

 

pilot lights.

 

 

Note: If pilot does not stay lit, refer to Troubleshooting, pages 20 through

 

23. Also contact a qualified service person or gas supplier for repairs.

 

Until repairs are made, light pilot with match. To light pilot with match,

 

see Manual Lighting Procedure, page 18.

 

 

Ignitor Electrode

 

Thermocouple

Pilot Burner

Figure 16 - Pilot

7.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

Note: If pilot goes out, repeat steps 3 through 7.

8.Turn control knob counterclockwise C-clockwiseto the HIGH position. The main burner should light. Set control knob to any heat level between HIGH and LOW. To turn control knob from HIGH to a lower setting, press in the

control knob and turn counterclockwise C-clockwise .

Note: Both HIGH and LOW are locked positions. You must press in control knob before turning it from these positions.

CAUTION

Do not try to adjust heating levels by using the manual shutoff valve.

Continued

17

 

099404

Page 16 Page 18
Page 17
Image 17
Desa CGN10 installation manual Heater, Operating
Page 16 Page 18

CGN10 specifications

Desa CGN10 represents a significant advancement in the realm of sustainable energy solutions, particularly within the context of decentralized energy generation. This innovative concept is engineered to promote efficiency and sustainability, making it a noteworthy option for both urban and rural applications.

One of the defining features of Desa CGN10 is its versatility. The system can be deployed in various environmental contexts, accommodating diverse energy needs ranging from residential to industrial applications. Its modular design allows for scalability, enabling users to customize their energy generation capabilities according to their specific requirements.

Incorporating cutting-edge renewable energy technologies, Desa CGN10 offers multi-source energy generation, including solar, wind, and bioenergy. The integration of these sources enhances energy reliability and diminishes dependence on traditional fossil fuels. The solar component utilizes high-efficiency photovoltaic panels, designed to capture maximum sunlight and convert it into usable energy. Wind turbines included in the system leverage advanced aerodynamic designs for improved performance in varying wind conditions. Additionally, bioenergy capabilities allow for the conversion of organic waste into energy, fostering circular economy principles.

Another significant characteristic of the Desa CGN10 is its advanced energy management system (EMS). This intelligent framework optimizes energy generation and consumption, ensuring that the available resources are used in the most efficient manner. The EMS employs real-time data analytics, allowing for predictive maintenance, which in turn minimizes downtime and enhances overall system reliability.

Furthermore, Desa CGN10 prioritizes user experience through a user-friendly interface that grants users control over their energy production and consumption. This interface provides insights into energy usage patterns, enabling users to make informed decisions and contribute to energy conservation efforts.

Overall, Desa CGN10 is a forward-thinking solution that represents a fusion of innovative technologies and sustainable practices. It empowers communities and businesses to harness renewable energy, reduce carbon footprints, and take significant strides toward energy independence. As the world shifts toward cleaner energy solutions, Desa CGN10 is poised to play a crucial role in the transition to a more sustainable future.
Top Page Image Contents