Desa CHDV37N/P Horizontal Termination Configurations, Direct-Vent Fireplace Natural/Propane/Lp

CHDV37N/P(A,B) AND CHDV41N/P(A,B)

DIRECT-VENT FIREPLACE (NATURAL/PROPANE/LP)

VENTING INSTALLATION

Continued

Horizontal Termination

Configurations

Figures 16 through 20 show different con- figurations for venting with horizontal ter- mination. Each figure includes a chart with vertical minimum/maximum and horizon- tal maximum dimensions which must be met. Seal all connections with high tem- perature silicone sealant (outer pipe only) as specified in the second warning statement on page 7. All horizontal terminations re- quire 1/4" rise per 12" of horizontal run.

UP

CBGFVK Vent Kit Shown (recommended for use with cabinet mantel)

Horizontal Venting

Vertical (V)	Horizontal (H)
37" min.	10" max.

Figure 16 - Horizontal Termination Configuration for Rigid Venting

UP

Horizontal Venting

Vertical (V)	Horizontal (H)
44" min.	29" max.

(30° and 90° only, no vertical pipe)

55" min. 41" max.

(30° elbow, 1' vertical pipe, 90° elbow)

67" min.	60" max.
79" min.	84" max.
96" min.	20' max.

Note: This configuration for use with corner installation.

CBVK Vent Kit Shown

Figure 17 - Horizontal Termination Configuration for Rigid Venting Using One 90° Elbow

Horizontal Venting

See information in
Figure 17 for
Vertical(V) and
Horizontal(H) maxi-	UP
mums and mini-
mums. The same
amounts apply for
flexible venting. (A
higher termination
mounting location is
desirable.)
Note: Figure 16
applies to rigid
venting only.

Figure 18 - Horizontal Termination Using Flexible Venting

10 105542