9.Place logs “B” as shown in Figures 25 and 26. Lift the propped up end of log “A” that is propped up and place log “B” under it. At the same time, the other side of log “B” is placed over the other log “A”. Repeat procedure for the other log “B”.
Figure 25 LOG “B” PLACEMENT |
Figure 26 LOG “B” PLACEMENT
10.Take twigs “C” (shaped like a “Y”) and place them as shown in Figures 27 and 28.
11.Take twigs “D” (bent twig) and place them as shown in Figures 27 and 28.
Figure 27 LOGS “C”, “D” AND “E” PLACEMENT |
12.Place twig “E” across the top of logs “B” shown in Figures 25 and 26.
Figure 28 LOGS “C”, “D” AND “E” PLACEMENT
13.When finished installing the logs, close the glass doors securing the four (4) spring loaded latches.
14.Replace the louvers in reverse order with the grilles pointing in the down position.
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual for assistance. Consult a qualified installer for additional information.
GLASS DOOR CLEANING AND REPLACEMENT
When cleaning or replacement is necessary, refer to the following steps.
NOTE: Before proceeding make sure unit is completely cool.
CLEANING GLASS DOOR
•Remove the top and bottom louvers and the screen assembly. (see figure 29).
•Undo the four spring door latches (see figure 20).
•To install or replace items removed, simply reverse these procedures.
REPLACING GLASS DOORS
•If replacement of the entire assembly (frame and glass assembly) is required, carefully remove the six (6) screws located on the hinge at the left end of the glass door while holding the frame assembly to prevent it from falling and causing injury.
•Remove glass assembly retainer brackets by removing two screw nuts located at the top and bottom of the glass door, frame (see figure 30). Carefully lean the glass away from the frame and remove for replacement.
•Be sure that the gaskets and panels are squarely placed in the frame and that all brackets and screws are firmly secured.
- 10 - | For more information, visit www.desatech.com |
