INSTALLATION
Installing Logs (Cont.)
15
INSTALLATION
Continued
Notches
Screws for
Mounting Screen
Figure 28 - Installing Fireplace Screen
INSTALLING LOGS (MODELS EFS33NRA, EFS33PRA, VSGF33NRA, AND VSGF33PRA)
WARNING: Failure to position the parts in accor- dance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.
CAUTION: Do not remove the data plates attached to the heater base assembly. The data plates contain important safety and warranty information.
It is very important to install these logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.
1.Place front log on top of the grate. Make sure the notches in the bottom of the log fit over the grate prongs (see Figure 29). Push back of logs flush with metal grate bars.
2.Rest middle log behind metal posts on grate assembly. Make sure the grooves in the bottom of the log fit over the grate. Bring the log forward next to the metal posts (see Figure 30).
3.Slide the grooves in the back of the rear log against the rear grate prongs. Make sure the log fits securely over the prongs (see Figure 31). Make sure log is completely vertical and not leaning in toward burner where the flame will touch the log.
4.Install fireplace screen by slipping notches of fireplace screen over screws on front of fireplace (see Figure 28).
WARNING: You must operate this fireplace with the fireplace screen in place. Make sure fireplace screen is in place before running fireplace.
| Front Log | |
Notch | Metal | |
| ||
| Grate | |
Grate | Bars | |
| ||
Prongs |
| |
Figure 29 - Installing Front Log |
| |
| Middle Log | |
Groove | Groove | |
| ||
| Grate | |
Metal Post |
| |
Figure 30 - Installing Middle Log |
| |
Groove in | Rear Log | |
Back of Log | ||
| ||
Grate Prong | Groove in | |
| Back of Log | |
| Grate Prong |
Figure 31 - Installing Rear Log
For more
visit www.
.com
